Diagbox 7.38 by scary can't read any ECU

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
WRC-RUSH
New User
Posts: 1
Joined: 01 Jul 2012, 08:16
Location:
My Cars:

Diagbox 7.38 by scary can't read any ECU

Post by WRC-RUSH »

Hi guys,

I've tried forever getting this to work with no success :cry:
first with W7 and I even bought an XP laptop especially for it now, fresh install still c :cry: not read any ecu.
I installed the Diagbox and updated it to 7.38 according to the video and pdf instructions provided with it.
There are no further instructions with it for installing the interface drivers.
I ran the driver installation provided with it, and it finishes succesfuly.
I restarted the pc after the installation.
Diagbox opens fin :shock: e with no errors / activation requests, but when I try to connect to a car nothing works. Auto detection does not work, and neither manually. It keeps saying ECU HAS NOT REPLYED or if I choose pp2000 option it says:

it is not possible to start peugeot planet for the following reasons;

Peugeot planet interface is not connected to the USB port of your PC,
Peugeot planet interface is being used by anotherapplication.

I tried connecting to different car with no success.
Is it something I'm doing wrong? what do I need to do to get it working?

Please your help is greatly appreciated.

Thanks
User avatar
Stickyfinger
(Donor 2016)
Posts: 10411
Joined: 28 Mar 2013, 21:05
Location: Somset my lovleee
My Cars: Xantia V6 ACTIVA 3ltr 24v Manual p1
Xm 2.1TD Ph2 Exclusive
AX, little Daffodil
SAXO White Mk1. Sally
x 1280
Contact:

Re: Diagbox 7.38 by scary can't read any ECU

Post by Stickyfinger »

Hi and welcome...

What car ?
What Age
last8 of the Vin ?.......all this will help the answers

Is it a China Clone Lexia ?
Alasdair
Activa, the Moose Rider
3x C5x7 Steering racks and counting
wurlycorner
Posts: 1366
Joined: 30 Oct 2012, 22:37
Location: Chelmsford, Essex
My Cars: Two C5's...
Lots of CXs...
A couple of Xantia...
A C2...
Lots of Prelude's...
And a Sunny!
x 66
Contact:

Re: Diagbox 7.38 by scary can't read any ECU

Post by wurlycorner »

Yep, where where as it purchased/who from?

Also where are you? There may be a FCF member near you with a known working diagbox setup that can confirm if it's your car that's being awkward, or the diagbox kit you have is u/s.
--
Iain

1x '85 CX GTi Turbo s1 (metallic blue)
2x '85 CX GTi Turbo s2 t1 (metallic silver & grey)
'88 CX GTi Turbo s2 T2 (metallic light blue)
CX DTR T2 Safari (silver)
2x '96 Xantia Activa (Black & metallic green)
'01 C5 2.0 HDi LX Estate (Blue)
Post Reply