P0101 Fault on 90hp 2.0 hdi
Moderator: RichardW
P0101 Fault on 90hp 2.0 hdi
Is this most likely down to a faulty maf?
-
- Moderating Team
- Posts: 11563
- Joined: 02 Apr 2005, 16:11
- Location: Charmouth,Dorset
- My Cars: Currently:
C5 X7 VTR + Satnav Hdi estate Silver
C5 X7 VTR + Hdi Estate 2008 Red
In the past: 3, CX td Safaris and about 7, XM td estates. Lovely cars. - x 1199
Re: P0101 Fault on 90hp 2.0 hdi
Can' tell from that I'm afraid as I don't have a Lexia that works, what does it do or doesn't?
Peter
Peter
- Gibbo_Wirral
- Posts: 183
- Joined: 17 Jul 2013, 14:34
- Location: Formby, West Lancs.
- My Cars: Peugeot 206 Sport 2L HDI
- Contact:
Re: P0101 Fault on 90hp 2.0 hdi
That code is usually for a faulty MAF or the wiring.
Take out the air box and MAF and check the wiring from the MAF socket right down to the loom.
You can check inside the MAF for any broken wires, but its not a conclusive test.
Take out the air box and MAF and check the wiring from the MAF socket right down to the loom.
You can check inside the MAF for any broken wires, but its not a conclusive test.
Peugeot Planet Diagnostics: Wirral, Merseyside, Lancashire, Cheshire, North Wales
Re: P0101 Fault on 90hp 2.0 hdi
Thanks for the reply guys I cleared the codes last month and have done another scan today and the following faults have appeared in this order.
Permanent fault. Air flowmeter signal. Air flow too low coherence P101.
Intermittent fault. EGR air circuit fault. Airflow measured less than reccomended P0401
Permanent fault. Air flowmeter signal. Air flow too low coherence P101.
Intermittent fault. EGR air circuit fault. Airflow measured less than reccomended P0401
Re: P0101 Fault on 90hp 2.0 hdi
Cheers gibbo Ill check the wiring. Maf looks fine no breaks etc
Re: P0101 Fault on 90hp 2.0 hdi
Replacement maf and repaired a split on a hose going to the egr.
No more fault codes
No more fault codes