Hi guys,
I've got the 406 hdi 110 as a few of you may know. Recently the car has been doing this strange this where it seems the car cuts out for a split second and then its fine again, while driving you can feel a real jerk when this happens.
also yesterday the engine just stopped when i went to change from 1st to reverse, i still had the clutch down so I'm sure I didn't stall it!
This morning I put PP2000 onto the car and im getting a engine ecu fault code "intermittent fault. engine speed. coherence"
I'm not sure what this means but I'm thinking maybe a crank shaft sensor? or cam shaft sensor?
Cheers for any help
Patrick
406 hdi 110 engine speed fault code
Moderator: RichardW
-
- Posts: 64
- Joined: 23 Jan 2013, 11:19
- Location: Christchurch, New Zealand
- My Cars:
-
- Forum Treasurer
- Posts: 10814
- Joined: 07 Aug 2002, 17:12
- Location: United Kingdom
- My Cars: MK2 '17 C4GP 1.6 BlueHDi 120
'13 3008 1.6 HDi GripControl - x 984
Re: 406 hdi 110 engine speed fault code
Crank sensor I expect - I think the cam sensor is only used at start up to confirm that cam is rotating and in synch with crank.
Richard W
-
- Posts: 64
- Joined: 23 Jan 2013, 11:19
- Location: Christchurch, New Zealand
- My Cars:
Re: 406 hdi 110 engine speed fault code
Cheers Richard, I think i might have a go at changing that out. Do they get dirty?
I'm assuming the the sensor is located down buy the crankshaft pulley?
Cheers
I'm assuming the the sensor is located down buy the crankshaft pulley?
Cheers
-
- Forum Treasurer
- Posts: 10814
- Joined: 07 Aug 2002, 17:12
- Location: United Kingdom
- My Cars: MK2 '17 C4GP 1.6 BlueHDi 120
'13 3008 1.6 HDi GripControl - x 984
Re: 406 hdi 110 engine speed fault code
They're not really known for giving trouble - it's on top of the gearbox, bit difficult to access AFAIK as it's buried under a load of wiring.
Richard W