I need some aftermarket wheels bolts and locking wheels nuts. I've got the alloy wheels with 20mm spacers so thats why I wanted the right alloy wheel bolts. I've seen some with the details below.
These bolts have the following dimensions:
Head Size - 19mm Hex
Thread Length - 26mm
Thread Pitch - 1.25mm
Bolt Diameter - M12
Bolt Seat - 60deg Taper
aftermarket wheels bolts
Moderator: RichardW
- Welshy_Pete
- Posts: 414
- Joined: 29 Apr 2012, 01:56
- Location: Wrexham Wales
- My Cars: 306 hdi 1999 + 306 hdi 2000
- x 2
- Oldpug
- Posts: 482
- Joined: 07 Aug 2010, 11:15
- Location: Berkshire
- My Cars: Peugeot 406 GLX
Audi A3 TFSI S Line
Mercedes SL320
(In the past,just about every old Peugeot you can think of.) - x 64
Re: aftermarket wheels bolts
I`ve experienced horror stories regarding non standard wheels/spacers/bolts,its very important that everything is spot on and SAFE!!
Take the car and a wheel to an experienced ally wheel specialist (not Kwick Fit Types)for advice and he will sell you the correct fitting kit.
It comes in handy and is very reassuring knowing that yours wheels are secure and safe when in the fast lane at 80mph +
Take the car and a wheel to an experienced ally wheel specialist (not Kwick Fit Types)for advice and he will sell you the correct fitting kit.
It comes in handy and is very reassuring knowing that yours wheels are secure and safe when in the fast lane at 80mph +
- spider
- Posts: 3949
- Joined: 05 Jan 2010, 14:28
- Location: Derby.
- My Cars: Soon, I hope...
- x 77
- Contact:
Re: aftermarket wheels bolts
I have some used but good gen locking bolts although they are in the 'wrong' box, ie the part number on the box (if its still there) is not the type of bolts. I'll see if I can find a pic of them. Something tells me they are for certain 206 model wheels only though.
Andy.
91 205D-Turbo, gone but still missed
02 106D, TUD5B, gone but not really missed apart from the MPG
91 205D-Turbo, gone but still missed
02 106D, TUD5B, gone but not really missed apart from the MPG
- Welshy_Pete
- Posts: 414
- Joined: 29 Apr 2012, 01:56
- Location: Wrexham Wales
- My Cars: 306 hdi 1999 + 306 hdi 2000
- x 2
Re: aftermarket wheels bolts
I've seen some 40mm alloy wheel threads.
Head Size - 19mm Hex
Thread Length - 40mm
Thread Pitch - 1.25mm
Bolt Diameter - M12
Bolt Seat - 60deg Taper
Head Size - 19mm Hex
Thread Length - 40mm
Thread Pitch - 1.25mm
Bolt Diameter - M12
Bolt Seat - 60deg Taper
Re: aftermarket wheels bolts
You don't have to go Kwik Fit, I'd recommend an independent specialist garage. Always cheaper
- spider
- Posts: 3949
- Joined: 05 Jan 2010, 14:28
- Location: Derby.
- My Cars: Soon, I hope...
- x 77
- Contact:
Re: aftermarket wheels bolts
I'll (try) to remember to check the ones I have.
Andy.
91 205D-Turbo, gone but still missed
02 106D, TUD5B, gone but not really missed apart from the MPG
91 205D-Turbo, gone but still missed
02 106D, TUD5B, gone but not really missed apart from the MPG