Peugeot 406 Speedo Problem
Moderator: RichardW
-
- Posts: 30
- Joined: 15 Jan 2011, 20:01
- Location:
- My Cars:
Peugeot 406 Speedo Problem
I Have A Peugeot 406 And The Speedo Isnt Working, I Changed The Clocks And It Still Doesnt Work, What Could Be Wrong?
- spider
- Posts: 3949
- Joined: 05 Jan 2010, 14:28
- Location: Derby.
- My Cars: Soon, I hope...
- x 77
- Contact:
Re: Peugeot 406 Speedo Problem
Likely cause is the sensor in the top of the transmission. You can see it from above (on most models) , may have to remove airbox for a better view. Its fitted to about the "top" of the diff housing.
Less likely a wiring or BSi (if multiplexed) fault or the drive pinion has moved (very annoying thankfully not common)
Less likely a wiring or BSi (if multiplexed) fault or the drive pinion has moved (very annoying thankfully not common)
Andy.
91 205D-Turbo, gone but still missed
02 106D, TUD5B, gone but not really missed apart from the MPG
91 205D-Turbo, gone but still missed
02 106D, TUD5B, gone but not really missed apart from the MPG
Re: Peugeot 406 Speedo Problem
There is also a "box" under the glove box on some models.
http://www.marklightfootltd.co.uk
Dacia Duster 1.5 dci
Renault Twizy Technic
Citroen C15
Citroen Ami
Dacia Duster 1.5 dci
Renault Twizy Technic
Citroen C15
Citroen Ami
- spider
- Posts: 3949
- Joined: 05 Jan 2010, 14:28
- Location: Derby.
- My Cars: Soon, I hope...
- x 77
- Contact:
Re: Peugeot 406 Speedo Problem
Ah that's a good point I'd completely forgotten about that one. At least its plug and play and does not need coding.Lighty wrote:There is also a "box" under the glove box on some models.
I'm not sure if the OP's car is plexed or not but I sort of (think?) the plexed ones do not have this box here as its function is done inside the 'box-o-tricks' aka the BSi
Andy.
91 205D-Turbo, gone but still missed
02 106D, TUD5B, gone but not really missed apart from the MPG
91 205D-Turbo, gone but still missed
02 106D, TUD5B, gone but not really missed apart from the MPG
-
- Posts: 30
- Joined: 15 Jan 2011, 20:01
- Location:
- My Cars:
Re: Peugeot 406 Speedo Problem
It's A 2000 406. Also The Mile-omter And Trip Meter Are Reading All Zeros. And When You Open The Door The Dash Lights Up. Can You Use A Second-hand BSI In It And Re-program It?
- spider
- Posts: 3949
- Joined: 05 Jan 2010, 14:28
- Location: Derby.
- My Cars: Soon, I hope...
- x 77
- Contact:
Re: Peugeot 406 Speedo Problem
It is plexed ? , its on the changeover year so I cannot be sure.
Was the old instrument panel showing 000000 as well ?
You cannot (easily!) reprogram the miles from the BSi it would need a panel and a BSi from the same car (possibly ECU as well) then you run into the realms of having to have the keys and transponder etc
Was the old instrument panel showing 000000 as well ?
You cannot (easily!) reprogram the miles from the BSi it would need a panel and a BSi from the same car (possibly ECU as well) then you run into the realms of having to have the keys and transponder etc
Andy.
91 205D-Turbo, gone but still missed
02 106D, TUD5B, gone but not really missed apart from the MPG
91 205D-Turbo, gone but still missed
02 106D, TUD5B, gone but not really missed apart from the MPG