Re fitting steering ram piston

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
User avatar
Welshy_Pete
Posts: 414
Joined: 29 Apr 2012, 01:56
Location: Wrexham Wales
My Cars: 306 hdi 1999 + 306 hdi 2000
x 2

Re fitting steering ram piston

Post by Welshy_Pete »

I managed to get the passanger side rack boot on in the end alot of work but sorted out now.

I had to take the stud nut of for the steering ram piston and nut of on the other end which holds it in place as well also the bracket out the way.

So Im just wandering wats the best way to get the steering ram back on. It was alot easyer to take it of but aligning the nut and bolt up alot harder to get it back on in place.

306 hdi

thanks
Post Reply