205 Sagging door

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

cheesesliceking

205 Sagging door

Post by cheesesliceking » 25 Jun 2003, 01:28

Helloo!
The wifes 205 drivers door when shut looks to be sagging a bit it doesnt line up right with the bodywork grooves etc.
N E Ideas ppl??[:)]
Cheers

JohnD
donor 2019
Posts: 2550
Joined: 15 Mar 2001, 00:41
x 36

Post by JohnD » 28 Jun 2003, 00:16

You'll need to examine the door and hinge and decide where the movement is coming from. The hinges are welded to the body on one side and bolted to the door on the other. Check the weld on the body and also the bolts for tightness on the door. If those two points are OK, see if there is movement in the hinge pin. The pin is removeable, and if it's worn, could be replaced.

cheesesliceking

Post by cheesesliceking » 01 Jul 2003, 18:42

Thanks matey I'll givce it a check [:)]