Hi all..
Can anyone tell me, Ive been asked about replacing a Pug 307 1.4 HDi Heater matrix.. Is this car ALSO A Dash out job??? If so how involved is it? Do you need to "unstick" the Scuttle trim on the bottom of the windscreen??
Thanks in advance..
Paul
307 Heater Matrix
Moderator: RichardW
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- Location: Somewhere in North Wales, Anglesey
- My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto
2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising - x 70
307 Heater Matrix
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
Hi paul -
Is the car sorted as yet ?
If not its a good rule of thumb bending down and look up under the dash looking for the 2 connecting heater hoses.
If these are visible and access is fair, then the matrix would also in general be removable from there.
I fear its not always quite the case as cars are laid out for LHD, meaning the RHD layout complicates matters in many cases.
A quick glance on peugeout servicebox indicates it would be possible not removing the dash as the hoses seems to go through the firewall on the LHS to the heater/blower unit, which would be the passenger side in your case.
Is the car sorted as yet ?
If not its a good rule of thumb bending down and look up under the dash looking for the 2 connecting heater hoses.
If these are visible and access is fair, then the matrix would also in general be removable from there.
I fear its not always quite the case as cars are laid out for LHD, meaning the RHD layout complicates matters in many cases.
A quick glance on peugeout servicebox indicates it would be possible not removing the dash as the hoses seems to go through the firewall on the LHS to the heater/blower unit, which would be the passenger side in your case.
Anders (DK) - '90 BX16Image
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- Location: Somewhere in North Wales, Anglesey
- My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto
2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising - x 70
Hello Anders,
A while since we last communicated directly! I think BX Fourm days from about 10 years ago, anyway, no Ive not got back to my customer, as Ive not had a positive answer from anyone.. Thank you for your response and tip, I guess Im gonna have to go down and see the car..
Is there a Haynes BOL book for this car yet?
Thanks
Paul
A while since we last communicated directly! I think BX Fourm days from about 10 years ago, anyway, no Ive not got back to my customer, as Ive not had a positive answer from anyone.. Thank you for your response and tip, I guess Im gonna have to go down and see the car..
Is there a Haynes BOL book for this car yet?
Thanks
Paul
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto