Peugeot Partner Gearbox
Moderator: RichardW
-
- (Donor 2020)
- Posts: 742
- Joined: 17 Apr 2008, 22:39
- Location: Clydebank, Near Glasgow.
- My Cars:
- x 3
Peugeot Partner Gearbox
Struggling to find any info on these on the net, what kind of gearbox does the 2.5 diesel use? BE3? Would it be a suitable doner for my 405? It's a 1997......
'96 405 1.6 GLX with 306 GTI engine on Cat cams @ 195bhp
'05 RenaultSport Clio 182 Cup, 102k
'97 406 1.9TD, 314k.
'05 RenaultSport Clio 182 Cup, 102k
'97 406 1.9TD, 314k.
- CitroJim
- A very naughty boy
- Posts: 49662
- Joined: 30 Apr 2005, 23:33
- Location: Paggers
- My Cars: Bluebell the AX, Polly the C3 Picasso, Pix the Nissan Pixo, Propel the duathlon bike, TCR Pro the road bike and Fuji the TT bike...
- x 6206
- Contact:
If it is a 2.5 then it'll most likely use the MG 'box (I think) as fitted to the 2.5TD Citroen XM. It's similar to the ML 'box used with the 2.1TD
Sadly, not really suitable as a donor for the 405 which uses a BE3.
What's wrong with your 405 'box?
Sadly, not really suitable as a donor for the 405 which uses a BE3.
What's wrong with your 405 'box?
Jim
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
-
- (Donor 2020)
- Posts: 742
- Joined: 17 Apr 2008, 22:39
- Location: Clydebank, Near Glasgow.
- My Cars:
- x 3
Yes, a Peugeot Partner 2.5 diesel. I saw a relatively low miler being broken for spares locally, I thought it might be a suitable doner. I posted a thread about my 405 gearbox a while ago, it's crunching 3rd which I presume is the usual worn synchro. I thought maybe the Partner used a BE3 since it seems to be a common gearbox.
'96 405 1.6 GLX with 306 GTI engine on Cat cams @ 195bhp
'05 RenaultSport Clio 182 Cup, 102k
'97 406 1.9TD, 314k.
'05 RenaultSport Clio 182 Cup, 102k
'97 406 1.9TD, 314k.
- CitroJim
- A very naughty boy
- Posts: 49662
- Joined: 30 Apr 2005, 23:33
- Location: Paggers
- My Cars: Bluebell the AX, Polly the C3 Picasso, Pix the Nissan Pixo, Propel the duathlon bike, TCR Pro the road bike and Fuji the TT bike...
- x 6206
- Contact:
Best anyway to get a replacement 'box from another 405 or 1.9TD Xantia as there are a plethora of of different BE3 'boxes around with different gearsets and final drives. There are no external markings to tell you and van ratios may not suit a car.evilally wrote:I posted a thread about my 405 gearbox a while ago, it's crunching 3rd which I presume is the usual worn synchro.
Either that or get any old BE3 with known good synchros and use it as a donor to rebuild yours. The synchros are all the same and not as hard as you think to swap.
Jim
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...