406 airbag light

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
User avatar
np
Posts: 1297
Joined: 13 May 2004, 03:13
Location: Bristol,UK
My Cars:
Contact:

406 airbag light

Post by np »

What is it with me & airbag lights?? :evil: After all my troubles with my Xantia,now the airbag light is coming on on my 406 :x .Its only just over 3 yrs old!! :x .
Anyone any ideas before i get it booked into the local indie.
Cheers. :)
53`406 est SE Hdi 140,110k
User avatar
AndersDK
Posts: 6060
Joined: 21 Feb 2003, 04:56
Location: Denmark
My Cars:
x 1

Post by AndersDK »

3 possible issues:

1) the front seat connectors
2) steering wheel ring connector
3) any front passenger disable switch
Anders (DK) - '90 BX16Image
PowerLee
Posts: 1260
Joined: 01 May 2004, 19:49
Location: United Kingdom
My Cars: Current - Slightly modified 2016 Pug 308 Puretech 130 Allure
Past:
2003 - 206 GLX TU3JP & 206 SE ET3JP4
1995 - 405 Executive XU10J2
1996 - 406 GLX XU10J4R
1994 - 405 GTX XU10J2
x 1

Post by PowerLee »

406 this young also could be a COM2000 issue :wink:
User avatar
np
Posts: 1297
Joined: 13 May 2004, 03:13
Location: Bristol,UK
My Cars:
Contact:

Post by np »

Well,it came on again today along with the beep & warning on the center screen display.I turned the pass a bag off then back on again & it cured it.Untill i came home from where i was,it then came back on again.I do have a leaky rear pass foot well,which makes me think it could have corroded the wiring under the seats.I`m getting a new door seal tomorrow(£50 :( :shock: )so hopefully that will cure the leak as water is getting in the bottom off the door seal.Will have a look at the weekend,if not off to the indie i suppose :( .
53`406 est SE Hdi 140,110k
steelcityuk
Posts: 1053
Joined: 03 Jul 2006, 21:51
Location: not applicable
My Cars: not applicable
x 1

Post by steelcityuk »

Steering wheel connector went in wife's 405 and it blew a fuse in the process which caused both the radiator fans to run whenever the ignition was on.

No wonder they can't get that new airbus sorted!

Steve.
not applicable
User avatar
np
Posts: 1297
Joined: 13 May 2004, 03:13
Location: Bristol,UK
My Cars:
Contact:

Post by np »

Well,touch wood i`ve not had the warning beep & light come on for 3 days now,touching wood :D .Maybe its sorted its self.Back to work tomorrow so will be doing more miles so will see what happens.
Got the new year door seal,£58 :shock: :cry: ,but it seems it still alowing water in.Its better,but still leaking.Looking at it,water is coming out of the drain hole on the bottom of the rear pass door,& in over the top of the seal.It only started doing this a week or so after i got the car.The door dos`nt sag when open,& its all a tight fit when closed,so nothing has changed.I may try to cut a bit of the rubber off the seal at the door drain hole to see if that cures it.Other than that,i`m a bit stumped :? :? .
53`406 est SE Hdi 140,110k
Post Reply