106 Heater fan motor replacement

lbos · Post by **lbos** » 08 Sep 2005, 14:50

How hard is this to do? Any hints or tips before breaking out the Haynes?
Thanks.

wheeler · Post by **wheeler** » 09 Sep 2005, 05:09

you need to remove the wiper arms & scuttle panel as the nuts that hold it in place are under there.inside just remove the ducting from it & unplug it,quite an easy job.

lbos · Post by **lbos** » 10 Sep 2005, 03:05

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by wheeler</i>

you need to remove the wiper arms & scuttle panel as the nuts that hold it in place are under there.inside just remove the ducting from it & unplug it,quite an easy job.
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
As well as removing the dash? Or can it be got to more easily?

wheeler · Post by **wheeler** » 11 Sep 2005, 16:47

you dont need to remove the dash,it drops out at the right hand side of the dash

lbos · Post by **lbos** » 12 Sep 2005, 01:19

I'll mention it to the guy who will be doing it, he said it was a dash out job so he will be pleased.