Cabin temp sensor noise

Linchpin · Post by **Linchpin** » 01 Sep 2005, 15:17

Hi guys, on my 306 im getting a bad buzzing noise from the interior light panel, its a fan with naffed bearings (being a PC tech i recognise the noise!)
Anyone got any idea how to get at it? I dont want to force and break the panel completley.
Cheers
Kev

PowerLee · Post by **PowerLee** » 01 Sep 2005, 22:46

Hi
Normally theres a couple of screws hidden behind the map reading light, Pop this off with a small flat blade screwdriver & they should be behind there.

Linchpin · Post by **Linchpin** » 02 Sep 2005, 13:22

Excellent! Any idea if the fan is interchangeable?
Cheers
Kev

PowerLee · Post by **PowerLee** » 02 Sep 2005, 22:51

Hi
No idea mate, But knowing how PSA likes to share as many parts as possible between models to keep costs down, It most likely is.

Linchpin · Post by **Linchpin** » 02 Sep 2005, 23:05

Excellent. Cheers for the help Powerlee

Paulmi16 · Post by **Paulmi16** » 03 Sep 2005, 01:39

The roof console on a 306 is the same as the 406 as I found when my interior light cover broke.
Paul.

Linchpin · Post by **Linchpin** » 03 Sep 2005, 15:00

I know the 306's dont all use the same roof console. Ill post a pic of mine.

Linchpin · Post by **Linchpin** » 03 Sep 2005, 15:06

Linchpin · Post by **Linchpin** » 03 Sep 2005, 15:07

The buzzing is coming from the slots. Definatly. Using my crude testing methods when you stick a piece of paper in there and stop the fan, no buzzing

Linchpin · Post by **Linchpin** » 03 Sep 2005, 15:08

Oh, and i didnt crack the glass, its always been like that!

Linchpin · Post by **Linchpin** » 05 Sep 2005, 12:52

Sorry, if anyone can confirm the map reading light is the bit with the rubber wheel to select left / right? I just want to make 100% sure before i stick a screwdiver under it and smash it to bits

Paulmi16 · Post by **Paulmi16** » 06 Sep 2005, 00:22

That looks like a phase 1 306 mine is different being a phase 2 I presume. Also the fan is not part of the roof console on mine either.
Paul.

Linchpin · Post by **Linchpin** » 06 Sep 2005, 12:54

No, its a Phase 2 XSi. I have had a Phase 1 XSi also, its different.