its the single button one
the red light works but no ouptut. i know this as i tried the digi camera method. my other one shows a light light where this is dead
i have tried changing the infa red LED but thats ok
also how do u program the plip again??
any ideas?
fault 306 plip
Moderator: RichardW
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by moomin</i>
dunno, i had the same problem with mine, tried a new infra-red LED but still nothing, so bought a new one, my guess is that its just nackerd
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
i wanna try and get mine to work
cant be much as there is only a few components on it and there is some life in th thing
dunno, i had the same problem with mine, tried a new infra-red LED but still nothing, so bought a new one, my guess is that its just nackerd
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
i wanna try and get mine to work
cant be much as there is only a few components on it and there is some life in th thing
-
- Posts: 27
- Joined: 13 Dec 2002, 04:52
- Location: northern ireland
- My Cars:
Reprogramming of the central locking is easy...
The reprogramming is a simple procedure.
1. Turn on the ignition
2. Within 10 seconds hold the original plip pointed at the sensor, about 8" away from it and press either button
3. Within a further 10 seconds do the same for the new plip. (you see you need a spare key - or remove the blade)
4. Turn off the ignition and test plip.
The reprogramming is a simple procedure.
1. Turn on the ignition
2. Within 10 seconds hold the original plip pointed at the sensor, about 8" away from it and press either button
3. Within a further 10 seconds do the same for the new plip. (you see you need a spare key - or remove the blade)
4. Turn off the ignition and test plip.