Peugeot 306 - phase 1 badge removal

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
Q4Legend
Posts: 29
Joined: 27 Sep 2004, 17:42
Location: United Kingdom
My Cars:

Peugeot 306 - phase 1 badge removal

Post by Q4Legend »

Hi,
How do you actually remove the badge/grille from a 306 phase 1 without damaging the body? There are plastic clips holding the grill in place but even after removal, the grill is held on by the badge bolted through it.
There are no signs of any screw/bolt access and I think you have to prize it off.
Any ideas?
Thanks
P 2501
Posts: 105
Joined: 18 Mar 2004, 12:59
Location:
My Cars:

Post by P 2501 »

The badge is held on by four pins on the back of it which go into the grill, and some clips on the top. If it is like mine, it will also have some of those gummy pads on the back for extra adhesion - very messy to remove.
Post Reply