Xantia slipping out of 5th

CommY · Post by **CommY** » 29 Sep 2004, 15:44

It only slips out of 5th when the revs are dropping and the car is going round a corner.
There is a fair bit of movement on the engine mounts (quite a lot)
Could the engine mounts cause this or is it knackered selector forks?
Any other suggestions.

Robin · Post by **Robin** » 29 Sep 2004, 15:47

Start with the mounts. I am not aware of this being a Xantia fault so hopefully the problem is not gearbox related. R.

Dave Burns · Post by **Dave Burns** » 29 Sep 2004, 23:28

I'd look at the gear lever to box linkages for stiff joints.
Jumping out of gear on the overrun can be a sign of a worn box, but not from flexing of the engine/box mountings, that can't influence the gearbox internals to do things like jump out of gear, except via problematic linkages.
Dave