Xantia Turbo CT heater on all the time
Moderator: RichardW
-
- New User
- Posts: 1
- Joined: 01 Mar 2019, 05:38
- Location: Melbourne Australia
- My Cars: DS23 Safari, Xantia Turbo CT
Xantia Turbo CT heater on all the time
My 1997 Xantia Turbo CT with climate control has the heater on all the time. Possibly no problem in the UK but definitely a problem here with temperatures pushing 40 C. Could be an actuator problem or a control problem. Does anyone know whether the actuator, which I assume controls a flap which directs air from the heater matrix, is accessible without removing the dash, which I am reluctant to tackle.
- xantia_v6
- Forum Admin Team
- Posts: 9053
- Joined: 09 Nov 2005, 22:03
- Location: France or NewZealand
- Lexia Available: Yes
- My Cars: -
1997 Citroen Xantia V6 (France)
1999 Citroen XM V6 ES9 (France)
2011 Peugeot 308 CC THP 155 (NZ)
1975 Jaguar XJ-S pre-HE (NZ) - x 825
Re: Xantia Turbo CT heater on all the time
If I remember correctly, the heat flap servo is mounted on the left hand side of the box near the firewall, just above carpet level.
I think that one of the mounting screws might be difficult to get a tool onto.
If you can get a Lexia onto the car, you should be able to check the operation of the ECU and the flap motor
I think that one of the mounting screws might be difficult to get a tool onto.
If you can get a Lexia onto the car, you should be able to check the operation of the ECU and the flap motor