C4 picasso 2013 onwards Front brake spring clips, 283mm discs with 5 holes

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
Rosanbo
Posts: 64
Joined: 16 Nov 2017, 22:07
Location: PONTYPRIDD
My Cars: CITROEN C4 PICASSO EXCLUSIVE E-HDI 115 AIRDREAM (2013 MK2) (DV6C engine)
x 3

C4 picasso 2013 onwards Front brake spring clips, 283mm discs with 5 holes

Post by Rosanbo »

They look like this. Anyone know how to take them off and put them back on?

Image
Last edited by Rosanbo on 29 Dec 2018, 18:11, edited 1 time in total.
RichardW
Forum Treasurer
Posts: 10872
Joined: 07 Aug 2002, 17:12
Location: United Kingdom
My Cars: MK2 '17 C4GP 1.6 BlueHDi 120
'13 3008 1.6 HDi GripControl
x 996

Re: C4 picasso 2013 onwards Front brake spring clips, 283mm discs with 5 holes

Post by RichardW »

According to Citroen:
c4picspring.JPG
If it's anything like the ones on the MK1s, it will spring off with ease, but will be almost impossible to refit!!
Richard W
Rosanbo
Posts: 64
Joined: 16 Nov 2017, 22:07
Location: PONTYPRIDD
My Cars: CITROEN C4 PICASSO EXCLUSIVE E-HDI 115 AIRDREAM (2013 MK2) (DV6C engine)
x 3

Re: C4 picasso 2013 onwards Front brake spring clips, 283mm discs with 5 holes

Post by Rosanbo »

Thank you,

I used water pump pliers squeezed the clip in a bit and used screwdriver at "a" to lift the clip out.

refitting - I used water pump pliers to squeeze it into place then I tapped the clip at "a" down into the hole with a hammer.

Very easy.
Post Reply