Hello,
I have an issue that i want to recalibrate the egs gearbox grid, but i dont want to do the last part where i have to accelerate to second gear and brake a few times.
So i was thinking what if i just skip the last part without accelerating when it asks me to and just click ok and finish the calibration process. Do you think the old calibration would remain, or will it set the car to some default values and i will loose my current gear change clutch engagement calibration that i worked so hard on?
Egs gearbox calibration hacking?
Moderator: RichardW
- GiveMeABreak
- Forum Admin Team
- Posts: 37424
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5741
Re: Egs gearbox calibration hacking?
The procedure needs to be followed to allow the calibration - skipping it will most likely result in the process restarting or it not accepting the new values until is has been completed properly.
Please Don't PM Me For Technical Help
Marc
Marc