C3 II HDI 1.6 DMF to SMF

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
User avatar
jsp
Posts: 327
Joined: 04 Dec 2014, 02:05
Location: Netherlands
My Cars: AX 3x 10E 1.4 GTI 5drs 1.0i
CX 2x GTI turbo
ID 19 1960

Now:
1960 ID 19
1984 CX GTI Turbo 1
1987 CX GTI Turbo 2
1987 AX 10E Pino
1994 AX 1.4 5dr TGS GTI
1994 AX 1.0 3dr Escapade
1996 AX 1.1 3dr spot Burgundy
1996 AX 1.1 5dr Verte
2003 peugeot 206 xs leather with auto A/C
x 12

C3 II HDI 1.6 DMF to SMF

Post by jsp »

Hi, I have a friends car who needs to be converted to SMF (kit4P).

But, I cant find anywhere a kit4p set?

VIN is: BW531420

Valeo says 835071
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36996
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: C3 II HDI 1.6 DMF to SMF

Post by GiveMeABreak »

Not available for your car from what I can see in the catalogue. They don’t have kits for all models. The kit you refer to is for a slightly different engine. You have the DV6DTED engine on your vehicle.
Please Don't PM Me For Technical Help

Marc
User avatar
jsp
Posts: 327
Joined: 04 Dec 2014, 02:05
Location: Netherlands
My Cars: AX 3x 10E 1.4 GTI 5drs 1.0i
CX 2x GTI turbo
ID 19 1960

Now:
1960 ID 19
1984 CX GTI Turbo 1
1987 CX GTI Turbo 2
1987 AX 10E Pino
1994 AX 1.4 5dr TGS GTI
1994 AX 1.0 3dr Escapade
1996 AX 1.1 3dr spot Burgundy
1996 AX 1.1 5dr Verte
2003 peugeot 206 xs leather with auto A/C
x 12

Re: C3 II HDI 1.6 DMF to SMF

Post by jsp »

DV6 dont have all the same crank bolt pattern ?
User avatar
white exec
Moderating Team
Posts: 7445
Joined: 21 Dec 2015, 12:46
Location: Sayalonga, Malaga, Spain
My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S
x 1752

Re: C3 II HDI 1.6 DMF to SMF

Post by white exec »

Try ADL-Blueprint. Not sure how well they cover French vehicles.
I have had one of their 4P kits on our RAV4 for several years.
Borg+Beck also offer SMF iirc.
Chris
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36996
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: C3 II HDI 1.6 DMF to SMF

Post by GiveMeABreak »

jsp wrote: 02 May 2018, 16:25 DV6 dont have all the same crank bolt pattern ?
I think it's not just the bolt pattern, it's also to do with the different engine output / specs / etc., these SMF kits have to be right in order to do the job the DMF does - get it wrong and there's a high risk of damage - that's why they are only gradually adding these to the catalogue - Valeo probably won't have a kit for every model / engine combo - only the more popular makes where there is a higher demand.
Please Don't PM Me For Technical Help

Marc
User avatar
white exec
Moderating Team
Posts: 7445
Joined: 21 Dec 2015, 12:46
Location: Sayalonga, Malaga, Spain
My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S
x 1752

Re: C3 II HDI 1.6 DMF to SMF

Post by white exec »

There also seems to a 'commercial' dimension to the availability of SMF kits. When I was contemplating fitting a kit to our RAV4 (after not one but two OE DMFs had failed), Valeo were an obvious choice, promoting, as they did, a number of kits for various makes of vehicle. Oddly, their catalogue did not contain kits for Toyota diesels, and I had some contact with them about this gap in their SMF range. It was explained that "for commercial reasons", rather than technical, the company could not offer Toyota-applicable kits. My reading of this was that Valeo (or one of their associated companies) were possibly a supplier to Toyota, and this could be jeopardised by their offering a radical alternative to standard installed parts. Just surmise. Locating the ADL-Blueprint kit solved the problem.
Chris
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36996
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: C3 II HDI 1.6 DMF to SMF

Post by GiveMeABreak »

Absolutely Chris - the commercial angle should not be overlooked.
Please Don't PM Me For Technical Help

Marc
User avatar
jsp
Posts: 327
Joined: 04 Dec 2014, 02:05
Location: Netherlands
My Cars: AX 3x 10E 1.4 GTI 5drs 1.0i
CX 2x GTI turbo
ID 19 1960

Now:
1960 ID 19
1984 CX GTI Turbo 1
1987 CX GTI Turbo 2
1987 AX 10E Pino
1994 AX 1.4 5dr TGS GTI
1994 AX 1.0 3dr Escapade
1996 AX 1.1 3dr spot Burgundy
1996 AX 1.1 5dr Verte
2003 peugeot 206 xs leather with auto A/C
x 12

Re: C3 II HDI 1.6 DMF to SMF

Post by jsp »

Thanks all just found out this car has a SMF factory so no need to replace the flywheel.
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36996
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: C3 II HDI 1.6 DMF to SMF

Post by GiveMeABreak »

Very odd, we have the same engine in our C3 II and that seems to have a DMF.
Please Don't PM Me For Technical Help

Marc
User avatar
jsp
Posts: 327
Joined: 04 Dec 2014, 02:05
Location: Netherlands
My Cars: AX 3x 10E 1.4 GTI 5drs 1.0i
CX 2x GTI turbo
ID 19 1960

Now:
1960 ID 19
1984 CX GTI Turbo 1
1987 CX GTI Turbo 2
1987 AX 10E Pino
1994 AX 1.4 5dr TGS GTI
1994 AX 1.0 3dr Escapade
1996 AX 1.1 3dr spot Burgundy
1996 AX 1.1 5dr Verte
2003 peugeot 206 xs leather with auto A/C
x 12

Re: C3 II HDI 1.6 DMF to SMF

Post by jsp »

Not all markets have DMF in the C3 II
Post Reply