Handbreak light on after front barings changed

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Webo83
Posts: 23
Joined: 20 May 2017, 20:22
Location: Uk walsall
My Cars: Xsara picasso 02 reg 1.6 petrol
x 1

Re: Handbreak light on after front barings changed

Post by Webo83 »

GiveMeABreak wrote: 14 Feb 2018, 12:33 In case you need the parts to cross-reference:

(4) Original FRONT HUB BEARING - PSA Part: 3350 86
(4) Over 3 years old E:WHEEL BEARING KIT PSA Part: E268570

Kit here:
http://www.ebay.co.uk/itm/MAPCO-26365-W ... SwzrxUxh2X

Or a Genuine PSA one brand new here £39:
http://www.ebay.co.uk/itm/Genuine-Peuge ... xyfyhRYADF

C2 Hub.png

Image


Thank-you so so much you really helped me out, kit you recommended is ordered. so now I know the handbrake light is the abs warning as I didn't replace bearings correct for my car. so now I ordered both front kits and all new sensors too ,you really helped if you don't mind can I ask one more question then if I have no traction control do you know what the "traction control" light is ( car in skid marks ) thank-you everyone especially you Marc
Stuart
Webo83
Posts: 23
Joined: 20 May 2017, 20:22
Location: Uk walsall
My Cars: Xsara picasso 02 reg 1.6 petrol
x 1

Re: Handbreak light on after front barings changed

Post by Webo83 »

These are the two dash lights I know what the handbrake is now thanks to you but not sure on other if I have no traction control tia
Stuart
Dash light
Dash light
User avatar
GiveMeABreak
Forum Admin Team
Posts: 37433
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5742

Re: Handbreak light on after front barings changed

Post by GiveMeABreak »

No problems, hopefully that kit will sort things out for you.

Aaahhh - I see that you have the other display (I mentioned there were 3 possible ones on one of my earlier posts). That is slightly different - here are the warning meanings. A picture really does help.

The light on the right (Red Circle with exclamation mark inside) can mean one or any of the following:
  • Brake fluid level
  • Electronic brakeforce distribution fault
  • Parking brake
The one on the left (Yellow circle with car inside) is the ABS - not the ESP. That warning means:
  • ABS Fault
The ESP light on your C2 is this one below: - but it won't be available so you shouldn't see it.
C2-ESP.png
I hope that clears things up :-D
Please Don't PM Me For Technical Help

Marc
Webo83
Posts: 23
Joined: 20 May 2017, 20:22
Location: Uk walsall
My Cars: Xsara picasso 02 reg 1.6 petrol
x 1

Re: Handbreak light on after front barings changed

Post by Webo83 »

Thanks Marc so much at least I know it's all pretty much related to the fault of the wrong bearings then so hopefully with a new kit and all new sensors the problem will be sorted I'll hold off motorway driving for now then I don't want to be locking up or fish tailing.
I'll post an update once I've sorted it out and thanks again big help
User avatar
GiveMeABreak
Forum Admin Team
Posts: 37433
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5742

Re: Handbreak light on after front barings changed

Post by GiveMeABreak »

No worries, keep us posted :wink:
Please Don't PM Me For Technical Help

Marc
Post Reply