Berlingo wheel PCD

Our most popular forum is for Citroën problems, discussions and chat.
Specialising in AX, BX, ZX, Xantia,C5, Xsara, Saxo and XM. CX, 2cv & Berlingo, all are welcome.NOT for selling cars/parts!

Moderator: RichardW

User avatar
nginmu
Posts: 47
Joined: 05 Mar 2010, 22:25
Location: Blackpool UK
My Cars: 2006 Berlingo diesel van

Berlingo wheel PCD

Post by nginmu » 09 Jan 2018, 17:18

Would anyone be able to tell me the wheel bolt PCD for the following vehicle:

Citroen Berlingo Diesel 1868 cc
Date of first registration: 30/03/2006
Revenue weight: 1805kg
Tyres: 175/65/14
Variant: GBWJYB
Model: Berlingo 600D X

Thanks for any info. I'm looking for two wheels at the scrappies & wanted to be able to work out what will and won't fit.

Very rough measurement with a bent tape measure seen through an oblique phone pic on a facebook post gives about 100mm +/- maybe 4mm; hoping for a tad more accuracy to be on the safe side
0x

User avatar
GiveMeABreak
Forum Admin Team
Posts: 7076
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: '09 C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
'07 C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
Past:
'76 GS 1000 Cedreat Yellow (yuk)
'79 GS 1220 Geranium Red
'78 CX 2.4 Turbo Prestige C-Matic Nevada Beige
'84 CX 20 Polar White
'90 XM 2.0 SX Polar White
'93 XM 2.0 Turbo Prestige Polar White
'94 XM 2.0 Turbo Prestige Emerald Green Pearlescent
'98 C15 Romahome White
'99 Xantia 2.0 HDi SX Hermes Red
'01 C5 2.0 HDi SX Wicked Red
'05 C5 2.0 HDi Exclusive Obsidian Black
x 488

Re: Berlingo wheel PCD

Post by GiveMeABreak » 09 Jan 2018, 17:29

Do you have the VIN after all that? It's a lot easier :-D
0x
Marc

411514
donor 2017
Posts: 346
Joined: 14 Dec 2010, 16:26
Location: Sheffield, Uk
My Cars: Citroen C5 2.0 Hdi 2003
x 23

Re: Berlingo wheel PCD

Post by 411514 » 09 Jan 2018, 17:53

PCD is 4x108
0x
Sam

2003 C5 2.0HDI 110

User avatar
nginmu
Posts: 47
Joined: 05 Mar 2010, 22:25
Location: Blackpool UK
My Cars: 2006 Berlingo diesel van

Re: Berlingo wheel PCD

Post by nginmu » 09 Jan 2018, 18:09

Thanks - yeah buddy just called round unexpectedly and my steel rule seems to say about 108 albeit in the cold and the dark - thanks. Sorry wasn't sure if posting VIN was safe / allowed.

Are there any other parameters I should really check when buying wheels from scrappies.. offsets, locating holes etc
0x

411514
donor 2017
Posts: 346
Joined: 14 Dec 2010, 16:26
Location: Sheffield, Uk
My Cars: Citroen C5 2.0 Hdi 2003
x 23

Re: Berlingo wheel PCD

Post by 411514 » 09 Jan 2018, 18:14

So long as the stud pattern is correct, it is probably advisable to stick with wheels with roughly the same (ideally identical) offset to the original wheels to avoid issues like scrubbing on the arches when turning the wheels.

Other than that, it isn't usually a good idea to fit wheels which have a significantly different diameter/circumference to the original wheels as this will mess with the gearing.
0x
Sam

2003 C5 2.0HDI 110

User avatar
Paul-R
Posts: 2350
Joined: 07 May 2009, 16:24
Location: Wirral, NW England; Vaucluse 84, France
My Cars: 2015 1.6 Blue HDi 120 Peugeot 308 Active SW
2013 2.0 HDi 163 C5 Exclusive Tourer
2003 2.0 HDi 110 C5 Exclusive Estate (Gone)
2001 2.0 HDi 90 Xsara Estate (Gone)
x 106

Re: Berlingo wheel PCD

Post by Paul-R » 09 Jan 2018, 18:27

Two other things to look out for are the diameter of the centre hole and the offset of the wheel. Too small a hole and the wheel simply won't go on and too large a hole will make centring of the wheel possibly iffy. Get the offset wrong and you could make the steering too heavy, catch the bodywork when turning the steering wheel, wear the tyres out quickly or put excess strain on the wheel bearings
0x
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.

Inside every old person is a young person wondering what the hell happened.

"Trying is the first step towards failure" ~ Homer J Simpson​

User avatar
nginmu
Posts: 47
Joined: 05 Mar 2010, 22:25
Location: Blackpool UK
My Cars: 2006 Berlingo diesel van

Re: Berlingo wheel PCD

Post by nginmu » 09 Jan 2018, 18:47

Thanks :-)

This site is being very useful to see what might be out there that fits.. https://www.wheel-size.com

Seems I need to look at scrappies with plenty of cars that take 5.5Jx14 ET24; CBore: 65.1 mm; bolts; 4x108

Rim width: 5.5"
Rim fitment flange type: J
Rim diameter 14"
Rim offset ET24 - 24mm
Centre Bore: 65.1 mm
Wheel fitment type: bolts
Wheel bolt PCD: 4x108
Tyres: 175/65/14

Matching vehicles:

Citroen
-------
Berlingo (1996 - 2007)
C2 (2003 - 2009)
C3 (2002 - 2008)
Fukang (1994 - 2009)
Xsara (1997 - 2006)
ZX (1990 - 1998)

Peugeot
-------
1007 (2004 - 2009)
205 (1983 - 1998)
305 (1977 - 1989)
306 (1993 - 2002)
309 (1985 - 1993)
405 (1987 - 1999)
406 (1995 - 1999)
Partner (1996 - 2008)

Thanks folks :-)
0x

User avatar
Pug_XUD_KeenAmateur
Donor 2016
Posts: 423
Joined: 22 Apr 2013, 17:24
Location:
My Cars:
x 54

Re: Berlingo wheel PCD

Post by Pug_XUD_KeenAmateur » 09 Jan 2018, 21:25

I'm 99% certain that the
205 is a 13"
309 is a 13"
406 is a 15"

just try the rims on an axle with Discs, not Drums, on yours (fronts for sure) before you pay for 'em.

I can source 14"s but I'm a long way away and I'm sure they won't be too troublesome to find.
0x

User avatar
nginmu
Posts: 47
Joined: 05 Mar 2010, 22:25
Location: Blackpool UK
My Cars: 2006 Berlingo diesel van

Re: Berlingo wheel PCD

Post by nginmu » 11 Jan 2018, 23:24

Found a couple of shabby wheels of a C3 for £20 at the local scrappy - tyres are 165 not 175, in all other respects everything else seems to match up. Planning to take his existing 175 tyres off his damaged rims and swap them over onto the new rims which we've scrubbed up & painted, and get them balanced up.. hopefully job's a good'un :-)
0x