PAS PINION SEALS

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
BRIAN(UK)
Posts: 1
Joined: 18 Feb 2002, 11:16
Location:
My Cars:

PAS PINION SEALS

Post by BRIAN(UK) »

Have removed the seals but cannot remember what grooves the new ones should go in (4 grooves,3 seals).
Think it was two at the bottom (near bearing) and one at top ,
note this is off a R/H drive car.
Is this correct???
regards Brian
alan s
RIP 2010
Posts: 2542
Joined: 26 Jan 2001, 15:53
Location: Australia
My Cars:
x 6

Post by alan s »

Brian,
Refer to the site of our local friendly GP in Japan.
I think Yohsuke's (MD) site explains this well
http://www.bx.citroen.org/m23/m23e.html
There is a difference between LHD and RHD as is explained on the site.
Alan S
Post Reply