c5 lights
Moderator: RichardW
- GiveMeABreak
- Forum Admin Team
- Posts: 37433
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5742
Re: c5 lights
Can you post or PM me your VIN, I'd like to check something on your car..
Please Don't PM Me For Technical Help
Marc
Marc
Re: c5 lights
VF7**************[VIN obfuscated, can be read by forum staff]**************
Last edited by GiveMeABreak on 05 Aug 2017, 10:33, edited 2 times in total.
Reason: Masked VIN
Reason: Masked VIN
- GiveMeABreak
- Forum Admin Team
- Posts: 37433
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5742
Re: c5 lights
ok, I just wanted to check specs and procedures.
Try this if you get time:
Switch the ignition to the "ignition +" position (instead of accessories - switch the ignition on without starting though).
Close the doors
Activate the "automatic headlight" function (Long press on the left hand control under the steering wheel - may take longer than 5 seconds).
N.B. : A message is displayed on the multifunction screen : "headlamp lighting active". (keep the door closed to as not to mask any display message).
Now if you are not getting the message, I suspect that the sensor has been deactivated using Diagbox. A distinct possibility, seeing as the last owner had the Rain / Light sensors disconnected for some reason.
If you do get the message that the headlamp lighting is active or deactivated, to test functionality:
Start the engine.
Mask the rain/sunlight bi-sensor on the windscreen.
Set the lighting stalk to AUTO
Check the operation of the automatic illumination of the lights .
To check the auto wiping:
With engine still running, activate the automatic windscreen wipe (Position "I" or "AUTO").
A single flick of the wiper stalk downwards to activate a wipe should then set the auto wipers on.
Spray a little water onto the sensor on the screen - it should wipe.
Let us know what happens.
Try this if you get time:
Switch the ignition to the "ignition +" position (instead of accessories - switch the ignition on without starting though).
Close the doors
Activate the "automatic headlight" function (Long press on the left hand control under the steering wheel - may take longer than 5 seconds).
N.B. : A message is displayed on the multifunction screen : "headlamp lighting active". (keep the door closed to as not to mask any display message).
Now if you are not getting the message, I suspect that the sensor has been deactivated using Diagbox. A distinct possibility, seeing as the last owner had the Rain / Light sensors disconnected for some reason.
If you do get the message that the headlamp lighting is active or deactivated, to test functionality:
Start the engine.
Mask the rain/sunlight bi-sensor on the windscreen.
Set the lighting stalk to AUTO
Check the operation of the automatic illumination of the lights .
To check the auto wiping:
With engine still running, activate the automatic windscreen wipe (Position "I" or "AUTO").
A single flick of the wiper stalk downwards to activate a wipe should then set the auto wipers on.
Spray a little water onto the sensor on the screen - it should wipe.
Let us know what happens.
Please Don't PM Me For Technical Help
Marc
Marc
Re: c5 lights
Sorry for slow reply.i have tried thus marc and nothing happens.when i turn key on and press button on stalk there is no bong sound or message on the screen and that used to work before.