Hi,
Got a P0500 Vehicle speed signal fault : Value received incorrect from Lexia. It sets the MIL light and gives a "Depollution system faulty" message.
What causes this? The speedometer works fine. Where does the ECU take this signal from? I can't find any sensor on the gearbox.
All info and ideas appreciated!
Citroen C5 P0500 Vehicle speed signal fault : Value received incorrect
Moderator: RichardW
- myglaren
- Forum Admin Team
- Posts: 25488
- Joined: 02 Mar 2008, 13:30
- Location: Washington
- My Cars: Mazda 6
Ooops.
Previously:
2009 Honda Civic :(
C5, C5, Xantia, BX, GS, Visa.
R4, R11TXE, R14, R30TX - x 4924
Re: Citroen C5 P0500 Vehicle speed signal fault : Value received incorrect
IIRC it comes from the ABS circuit.
Välkommen
Välkommen
Re: Citroen C5 P0500 Vehicle speed signal fault : Value received incorrect
OK. I've recently replaced a front wheel bearing. Maybe something went wrong there..
- myglaren
- Forum Admin Team
- Posts: 25488
- Joined: 02 Mar 2008, 13:30
- Location: Washington
- My Cars: Mazda 6
Ooops.
Previously:
2009 Honda Civic :(
C5, C5, Xantia, BX, GS, Visa.
R4, R11TXE, R14, R30TX - x 4924
Re: Citroen C5 P0500 Vehicle speed signal fault : Value received incorrect
Yes, possible damage to the ABS sensor or wiring or even (less probable) the reluctor ring.
Re: Citroen C5 P0500 Vehicle speed signal fault : Value received incorrect
Agree with myglaren! Also when you fitted the wheel bearing did you fit it the correct way round with the magnetic pickup on the inside
Re: Citroen C5 P0500 Vehicle speed signal fault : Value received incorrect
OK. I put the black side on the bearing facing inwards. (I hope..)
Re: Citroen C5 P0500 Vehicle speed signal fault : Value received incorrect
Yeah black side is pickup hopefully you have put it the sensor side I'd re-check that's correct first! Unless obvious damage to speed sensor or wiring