Hi guys need some assistance on this issue
To day I plugged in to a Citroën relay 2.8 hdi I have diagbox 7.76 . The problem I am having it will not talk to this vehicle
The message I got was switch ignition off and back on again which I did . Now at the bottom of the screen there is another message .connected the portable to the vehicles 2 way diagnostic socket. I have Google drive this and I cannot come up with a solution to the problem.
This is United Kingdom right hand drive
Vin number is VF7**************[VIN obfuscated, can be read by forum staff]
I never have an issue plugging in to cars my vci is rev c
Please note I could read the battery voltage.
In tool settings I could see my vci
I also have a ds150e and I had no trouble reading the fault code
Thanks in advance regards jay
Citroën relay 2006 2.8 hdi lexia issues diagnostic communication
Moderator: RichardW
-
- Posts: 3
- Joined: 23 Feb 2017, 01:03
- Location: United Kingdom
- My Cars: Citroën relay 2.8 hdi 2006 56 plate
-
- Moderating Team
- Posts: 11578
- Joined: 02 Apr 2005, 16:11
- Location: Charmouth,Dorset
- My Cars: Currently:
C5 X7 VTR + Satnav Hdi estate Silver
C5 X7 VTR + Hdi Estate 2008 Red
In the past: 3, CX td Safaris and about 7, XM td estates. Lovely cars. - x 1207
Re: Citroën relay 2006 2.8 hdi lexia issues diagnostic communication
Unfortunately I have the same problem with my 406s, I have two cars and two Lexias and none of them will comunicate.
Peter
Peter