heating and ventilation

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
mickrochip
Posts: 6
Joined: 19 Dec 2015, 16:08
Location: Newtownstewart, northern ireland200
My Cars: 2004 c5 2.0l 16v hdi (facelift model)

heating and ventilation

Post by mickrochip »

hello there
I have a problem with my 04 2.0l 16v vtr hdi. 6speed dual zone. (FACE LIFT MODEL) the heater blower motor stopped working, i have been told that a heater resistor is the problem. I have looked to left of clutch pedal for this resistor, looked around motor housing behind glove box i can not see where this resistor is I have also been told by a citroen breaker that the resistor is built into the motor, all fuses are ok display screen is ok showing fan speeding up and slowing down at the minute when testing connections to motor RED/BLACK THERE IS ALSO 2 more thinner wires green/orange/ purple black. can anyone please tell me where this resistor is so that i can change it and get car back on road again
thank you
User avatar
darbuck
Donor 2023
Posts: 1026
Joined: 25 May 2014, 16:45
Location: Offaly, Ireland.
My Cars: 2008 Citroen C5 X7 Tourer VTR+ (138 BHP)
2007 Nissan Primera P12 1.6 T-Spec (110BHP)
2003 Citroen C5 Estate level 2 (110 BHP) 2.0 HDI
2001 Nissan Maxima QX 2.0 V6
x 141

Re: heating and ventilation

Post by darbuck »

can you tell me what model it is and ill check on citroen service
Darren
Peter.N.
Moderating Team
Posts: 11573
Joined: 02 Apr 2005, 16:11
Location: Charmouth,Dorset
My Cars: Currently:

C5 X7 VTR + Satnav Hdi estate Silver
C5 X7 VTR + Hdi Estate 2008 Red

In the past: 3, CX td Safaris and about 7, XM td estates. Lovely cars.
x 1204

Re: heating and ventilation

Post by Peter.N. »

If its an auto system it will probably have a pair of transistors inside the blower motor housing, you can replace them if you are handy with a soldering iron.

Peter
Post Reply