Headlights got water in I believe a common fault with the C3?
Where is it likely to be leaking in from and how to remove the light? I read somewhere the bumper needs to be released partly and the grill removed if so which bolts need removing and where are they situated?
Cheers Bill
Headlight misted
Moderator: RichardW
-
- Posts: 68
- Joined: 08 Jul 2016, 19:44
- Location: Manchester
- My Cars: Renault Clio Mk2 1,2 16V Ph2 with the D4F engine ( Current repair project )
Citroen C3 1.4 LX 2002 - x 2
- Sloppysod
- Donor 2024
- Posts: 965
- Joined: 23 May 2015, 23:35
- Location: North Wales
- My Cars: Citroens
1 x GS, 1 x GSX (Banger raced), 1 x GSA,
2 x CX Famililles, 1 x CX GTI,
BX, XM, Xantia, C5 Mk1,
C4 (Coupe), C4 (B7),
C5 (X7)
Renault
R4 Van
Fuego
Clio Campas - x 212
Re: Headlight misted
Bill, you aint going to like this........but according to the citroen repair guide you take the headlight off by undoing 3 bolts, however, to get to those bolts you ave to remove the inner wheel arches, grille and the bumper!!
Simples!!
See PM
Simples!!
See PM
Stu
"Some cause happiness wherever they go, others whenever they go"Oscar Wilde (1854-1900)
Major interventions
C5 Steering rack @ 58,000 mi
4 discs & Pads @ 63,585 mi
2 (AM6) oil exchanges @ 58,876 & 72,378 mi
"Some cause happiness wherever they go, others whenever they go"Oscar Wilde (1854-1900)
Major interventions
C5 Steering rack @ 58,000 mi
4 discs & Pads @ 63,585 mi
2 (AM6) oil exchanges @ 58,876 & 72,378 mi
- GiveMeABreak
- Forum Admin Team
- Posts: 37005
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5646
Re: Headlight misted
We have the remains of some bug inside at the bottom of one of our C3 headlights, and there it will stay until it fossilises or barbecues!
Please Don't PM Me For Technical Help
Marc
Marc
- Sloppysod
- Donor 2024
- Posts: 965
- Joined: 23 May 2015, 23:35
- Location: North Wales
- My Cars: Citroens
1 x GS, 1 x GSX (Banger raced), 1 x GSA,
2 x CX Famililles, 1 x CX GTI,
BX, XM, Xantia, C5 Mk1,
C4 (Coupe), C4 (B7),
C5 (X7)
Renault
R4 Van
Fuego
Clio Campas - x 212
Re: Headlight misted
Bugs are easy, if you can get the headlight bulb out, do so then hold the dyson to the hole- bug flies off!!GiveMeABreak wrote:We have the remains of some bug inside at the bottom of one of our C3 headlights, and there it will stay until it fossilises or barbecues!
Stu
"Some cause happiness wherever they go, others whenever they go"Oscar Wilde (1854-1900)
Major interventions
C5 Steering rack @ 58,000 mi
4 discs & Pads @ 63,585 mi
2 (AM6) oil exchanges @ 58,876 & 72,378 mi
"Some cause happiness wherever they go, others whenever they go"Oscar Wilde (1854-1900)
Major interventions
C5 Steering rack @ 58,000 mi
4 discs & Pads @ 63,585 mi
2 (AM6) oil exchanges @ 58,876 & 72,378 mi
- GiveMeABreak
- Forum Admin Team
- Posts: 37005
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5646
Re: Headlight misted
Crikey, I could suck the engine up with our Dyson! Might give that a try Stu.
Please Don't PM Me For Technical Help
Marc
Marc
- white exec
- Moderating Team
- Posts: 7445
- Joined: 21 Dec 2015, 12:46
- Location: Sayalonga, Malaga, Spain
- My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S - x 1752
Re: Headlight misted
To shift internal condensation/moisture:
Similar treatment to getting the bug out.
Remove bulb, and use a tube to wet-vac any appreciable amount of water.
To clear condensation, blow in air (warm is good, from a vac cleaner) until it clears, and then some.
Some moulded headlights have a venting cap on the back side. Leave this off, if it helps, to ensure headlight venting. Heat from the bulb will aid drying out.
Similar treatment to getting the bug out.
Remove bulb, and use a tube to wet-vac any appreciable amount of water.
To clear condensation, blow in air (warm is good, from a vac cleaner) until it clears, and then some.
Some moulded headlights have a venting cap on the back side. Leave this off, if it helps, to ensure headlight venting. Heat from the bulb will aid drying out.
Chris
-
- Posts: 68
- Joined: 08 Jul 2016, 19:44
- Location: Manchester
- My Cars: Renault Clio Mk2 1,2 16V Ph2 with the D4F engine ( Current repair project )
Citroen C3 1.4 LX 2002 - x 2
Re: Headlight misted
Thanks guys and cheers Sloppysod for the link.
Bill
Bill
-
- Posts: 68
- Joined: 08 Jul 2016, 19:44
- Location: Manchester
- My Cars: Renault Clio Mk2 1,2 16V Ph2 with the D4F engine ( Current repair project )
Citroen C3 1.4 LX 2002 - x 2
Re: Headlight misted
Hi guys
OK thanks to the links I managed to remove the Headlight unit to discover the seal was split and the retainer spring for the cover was not seated correctly.
I have repaired and replaced the seal and am now in the process off drying out the unit.
I discovered when removing the headlight that it can be removed without removing the bumper although fiddly when I replace the headlight I will show how it can be removed If in fact my observations and thoughts are correct???? If not I will hold my hands up and say remove the bumper
It still involves removing the plastic mud guard and the grill and as the bumper is only one or two extra bolts it may be easier to do them too If others wish to see how to remove the light without the bumper then that video will be for you.
Cheers Bill
OK thanks to the links I managed to remove the Headlight unit to discover the seal was split and the retainer spring for the cover was not seated correctly.
I have repaired and replaced the seal and am now in the process off drying out the unit.
I discovered when removing the headlight that it can be removed without removing the bumper although fiddly when I replace the headlight I will show how it can be removed If in fact my observations and thoughts are correct???? If not I will hold my hands up and say remove the bumper
It still involves removing the plastic mud guard and the grill and as the bumper is only one or two extra bolts it may be easier to do them too If others wish to see how to remove the light without the bumper then that video will be for you.
Cheers Bill
-
- Posts: 68
- Joined: 08 Jul 2016, 19:44
- Location: Manchester
- My Cars: Renault Clio Mk2 1,2 16V Ph2 with the D4F engine ( Current repair project )
Citroen C3 1.4 LX 2002 - x 2
Re: Headlight misted
OK didnt manage to get any video as I was dodging the rain should you wish to remove the head light. Yes it can be done without removing the bumper but it is quite fiddly and maybe best releasing the bumper.
If interested though. Once you have moved the mud cover from the wheel arch you can get a 10mm socket onto the bolt retaining the light and where you have removed the grill if you move the plastic that can be seen you can get a 10mm ratchet spanner into the gap and onto the bolt screw head obviously the top bolt is easy to remove. Once removed the light can be manipulated out.
Sorry I didn't get the video this time but should I need to remove the headlight again I will set up the camera.
Cheers Bill
If interested though. Once you have moved the mud cover from the wheel arch you can get a 10mm socket onto the bolt retaining the light and where you have removed the grill if you move the plastic that can be seen you can get a 10mm ratchet spanner into the gap and onto the bolt screw head obviously the top bolt is easy to remove. Once removed the light can be manipulated out.
Sorry I didn't get the video this time but should I need to remove the headlight again I will set up the camera.
Cheers Bill