Hi folks. I'm half way through cambelt/ cam cover gasket/ cam seal/ water pump/ crankshaft seal change. Not going too badly but I'm not sure about this inlet pipe, there's no gasket but does look like old gasket goo. If its a rubber seal it's very, very knackered. Blue goo ok?
Thanks!
Which gasket goo?
Moderator: RichardW
Which gasket goo?
Fred, a silver 1998 1.9TD SX Xantia.
Gwin, a white 1994 1.1 AX.
Gwin, a white 1994 1.1 AX.
Re: Which gasket goo?
Any goo that is friendly to sensors will do. It tells on the tube.
If no sensors up or downstream then no worries what you use. Any old RTV.
If no sensors up or downstream then no worries what you use. Any old RTV.
Citroen C5 1.6 HDI 110bhp Estate 06 plate
French Mistresses gone.
Citroen C5 HDI Mk 1 hatchback
Vel Satis 3.5 v6
ZX 1.9D Est.
ZX 1.9DHatch
Xantia 1.9td est.
Xantia 2.0 hdi Est.
Xantia V6 MK1
Xantia V6 MK 2
French Mistresses gone.
Citroen C5 HDI Mk 1 hatchback
Vel Satis 3.5 v6
ZX 1.9D Est.
ZX 1.9DHatch
Xantia 1.9td est.
Xantia 2.0 hdi Est.
Xantia V6 MK1
Xantia V6 MK 2
Re: Which gasket goo?
Thanks! Having day off. Back to it tomorrow.
Fred, a silver 1998 1.9TD SX Xantia.
Gwin, a white 1994 1.1 AX.
Gwin, a white 1994 1.1 AX.