Hello to all,
At my xantia 1.8 16v with a.c sometimes the charging voltage is low and I think the brushes are worn.
Can I remove the brushes without removing the alternator? because I think, to do that I have to remove the intake manifold.
Any advice will be useful.
Change alternator brushes
Moderator: RichardW
Re: Change alternator brushes
Maybe if you have enough room.
It's a bit of a fiddly pfaff to disassemble the alternator on the bench without it being buried in the car.
Check out this chappie on YouTube - he has lots of neat guide videos on how to mend Valeo alternators.
How's the positive lead from your battery looking? If it's rotten (a known problem) your terminal voltage could appear a bit low...
It's a bit of a fiddly pfaff to disassemble the alternator on the bench without it being buried in the car.
Check out this chappie on YouTube - he has lots of neat guide videos on how to mend Valeo alternators.
How's the positive lead from your battery looking? If it's rotten (a known problem) your terminal voltage could appear a bit low...
Citroen Xantia Exclusive HDi
previously:
Citroen ZX Volcane - RIP
Peugeot 106 XN... stolen and destroyed by Kent Police
previously:
Citroen ZX Volcane - RIP
Peugeot 106 XN... stolen and destroyed by Kent Police
-
- Moderating Team
- Posts: 11563
- Joined: 02 Apr 2005, 16:11
- Location: Charmouth,Dorset
- My Cars: Currently:
C5 X7 VTR + Satnav Hdi estate Silver
C5 X7 VTR + Hdi Estate 2008 Red
In the past: 3, CX td Safaris and about 7, XM td estates. Lovely cars. - x 1199
Re: Change alternator brushes
May not be the brushes could be the regulator. The whole assembly may be removable for the back of the alternator but as mentioned it depends how good or otherwise the access is.
Peter
Peter
Re: Change alternator brushes
The positive lead from batery was changed and I made measurements directly on the alternator to eliminate any other doubt.
I will try to remove the regulator directly from the car even if I have to dismantle the intake manifold and the oil filter.
Thanks all for advices.. I will come back with news.
I will try to remove the regulator directly from the car even if I have to dismantle the intake manifold and the oil filter.
Thanks all for advices.. I will come back with news.