Xantia HDI intermediate bearing

Stewart(oily) · Post by **Stewart(oily)** » 12 Jun 2015, 11:29

Does anyone know the number of this bearing (not citroen) I reckon it is the source of my mystery clunk on starting the engine.

citroenxm · Post by **citroenxm** » 12 Jun 2015, 11:49

I assume you have checked the upper engine torque mount.. bolted to the SIDE of the syspension turret by 3x 16mm boots?? They are common for splitting and cause a knock on engine rock..

Stewart(oily) · Post by **Stewart(oily)** » 12 Jun 2015, 13:18

Is it the bush that splits ?

citroenxm · Post by **citroenxm** » 12 Jun 2015, 15:33

Yes.. it is.. was only about 30 quid from dealers last year or so..

Post by **RichardW** » 12 Jun 2015, 21:58

They knock like good uns when they're as worn as this

:

Still available (the whole mount, the bush is not available separately):

Part Number Description Quantity Price excl. VAT Price incl. VAT Total incl. VAT Selection
0000183946 MOUNTING BRACKT 25.73 GBP 30.88 GBP 30.88 GBP

citroenxm · Post by **citroenxm** » 12 Jun 2015, 22:03

Thanks richard... i thought it was 30 quid ish...

Stewart(oily) · Post by **Stewart(oily)** » 13 Jun 2015, 20:53

The rubbers in the dog bone part are intact, and dont look anything like that ?

is that one located where the old Xud jobbie was ?

citroenxm · Post by **citroenxm** » 13 Jun 2015, 21:24

XUD didnt have one, unless it was 2.1..

Its easy to locate, but needs removing to look at..

Look down the side of the Drivers side suspension turret, to the side of the cam belt plastic covers... below the two Vaccum Electrovalves...

Stewart(oily) · Post by **Stewart(oily)** » 14 Jun 2015, 01:02

Thank you, I shall whip it off and have a look, GSF show a bush for £12, thats more my style

rory_perrett · Post by **rory_perrett** » 14 Jun 2015, 09:04

While you are at it have a look at the mount to the inner wing as well. I had one go on a previous car and because the weight of the engine is on it its not that obvious just looking or gentle rocking the engine by hand.

Stewart(oily) · Post by **Stewart(oily)** » 20 Jun 2015, 16:48

The culprit was indeed the rubber bush or dogbone thing, I have ordered a replacement bush from the bay from a Lithuanian motorfactors for £9.99, I have had a good look at the P bushes and wishbone bushes and they all look good, I must have got lucky aligning them by eye before belting them on

Stewart(oily) · Post by **Stewart(oily)** » 26 Jun 2015, 15:59

The £9.99 Replacement bush arrived from the Lithuanian motorfactors, made in France, fitting was straightforward, and the clunk is gone

French Car Forum

Xantia HDI intermediate bearing

Xantia HDI intermediate bearing

Re: Xantia HDI intermediate bearing

Re: Xantia HDI intermediate bearing

Re: Xantia HDI intermediate bearing

Re: Xantia HDI intermediate bearing

Re: Xantia HDI intermediate bearing

Re: Xantia HDI intermediate bearing

Re: Xantia HDI intermediate bearing

Re: Xantia HDI intermediate bearing

Re: Xantia HDI intermediate bearing

Re: Xantia HDI intermediate bearing

Re: Xantia HDI intermediate bearing