Need to change the nearside (passenger) driveshaft this weekend (if GSF can get their act together and get one in for me )
I haven't got a Haynes for the car yet, so just checking what needs to be undone to get enough clearance to slide the shaft out of the hub.
Is it the usual (Steering knuckle ball joint and lower hub ball joint?)?
Are there any particular difficulties with getting these undone? (e.g. lower ball joint on a Xantia is a complete bitch to get a splitter tool on, I remember)
Thanks
C5 driveshaft change
Moderator: RichardW
-
- Posts: 1366
- Joined: 30 Oct 2012, 22:37
- Location: Chelmsford, Essex
- My Cars: Two C5's...
Lots of CXs...
A couple of Xantia...
A C2...
Lots of Prelude's...
And a Sunny! - x 66
- Contact:
C5 driveshaft change
--
Iain
1x '85 CX GTi Turbo s1 (metallic blue)
2x '85 CX GTi Turbo s2 t1 (metallic silver & grey)
'88 CX GTi Turbo s2 T2 (metallic light blue)
CX DTR T2 Safari (silver)
2x '96 Xantia Activa (Black & metallic green)
'01 C5 2.0 HDi LX Estate (Blue)
Iain
1x '85 CX GTi Turbo s1 (metallic blue)
2x '85 CX GTi Turbo s2 t1 (metallic silver & grey)
'88 CX GTi Turbo s2 T2 (metallic light blue)
CX DTR T2 Safari (silver)
2x '96 Xantia Activa (Black & metallic green)
'01 C5 2.0 HDi LX Estate (Blue)
Re: C5 driveshaft change
How much are the driveshafts at GSF?wurlycorner wrote:Need to change the nearside (passenger) driveshaft this weekend (if GSF can get their act together and get one in for me )
I haven't got a Haynes for the car yet, so just checking what needs to be undone to get enough clearance to slide the shaft out of the hub.
Is it the usual (Steering knuckle ball joint and lower hub ball joint?)?
Are there any particular difficulties with getting these undone? (e.g. lower ball joint on a Xantia is a complete bitch to get a splitter tool on, I remember)
Thanks
I bought one for the Berlingo from this lot - in stock, delivered next day delivery. Fitted by our own Citronut..
http://www.jandrcvjoints.co.uk/search.p ... C5&x=0&y=0" onclick="window.open(this.href);return false;
Sadly I can't help with your questions!
- Stickyfinger
- (Donor 2016)
- Posts: 10435
- Joined: 28 Mar 2013, 21:05
- Location: Somset my lovleee
- My Cars: Xantia V6 ACTIVA 3ltr 24v Manual p1
Xm 2.1TD Ph2 Exclusive
AX, little Daffodil
SAXO White Mk1. Sally - x 1289
- Contact:
Re: C5 driveshaft change
Two words Sir....Rattle Gun,...... beg steal or borrow, life is to short for 12 foot bars unless they have pumps on them and @@'s behind them.
Alasdair
Activa, the Moose Rider
3x C5x7 Steering racks and counting
Activa, the Moose Rider
3x C5x7 Steering racks and counting
-
- Forum Treasurer
- Posts: 10871
- Joined: 07 Aug 2002, 17:12
- Location: United Kingdom
- My Cars: MK2 '17 C4GP 1.6 BlueHDi 120
'13 3008 1.6 HDi GripControl - x 996
Re: C5 driveshaft change
Should be do-able with just the bottom ball joint off. Undo the hub nut with the wheel on the ground (35mm socket needed!). Jack up and support, suspension on low. Split bottom ball joint (no idea how tricky this is on the C5!). Drain the gear box oil, lift the hub out of the lower arm, disengage the shaft from the hub, and pull it out of the gear box - get hold of it behind the inner inner boot so the joint doesn't fall apart. Replace the driveshaft oil seal, otherwise it will leak! Refit the shaft. Refill the box with 75W80 oil (1.8 litres or thereabouts). Job done.
Richard W
-
- Posts: 1366
- Joined: 30 Oct 2012, 22:37
- Location: Chelmsford, Essex
- My Cars: Two C5's...
Lots of CXs...
A couple of Xantia...
A C2...
Lots of Prelude's...
And a Sunny! - x 66
- Contact:
Re: C5 driveshaft change
Thanks all.
The driveshaft was going to work out at £26 something after a stupid big discount offer they had on today, but the order didn't go through properly cause of something odd with stock levels and I had to email them about it, so we'll see...
This will be the first use in anger of what I've been installing over the last several months - makes it slightly easier than rolling around the drive in the rain
The driveshaft was going to work out at £26 something after a stupid big discount offer they had on today, but the order didn't go through properly cause of something odd with stock levels and I had to email them about it, so we'll see...
This will be the first use in anger of what I've been installing over the last several months - makes it slightly easier than rolling around the drive in the rain
--
Iain
1x '85 CX GTi Turbo s1 (metallic blue)
2x '85 CX GTi Turbo s2 t1 (metallic silver & grey)
'88 CX GTi Turbo s2 T2 (metallic light blue)
CX DTR T2 Safari (silver)
2x '96 Xantia Activa (Black & metallic green)
'01 C5 2.0 HDi LX Estate (Blue)
Iain
1x '85 CX GTi Turbo s1 (metallic blue)
2x '85 CX GTi Turbo s2 t1 (metallic silver & grey)
'88 CX GTi Turbo s2 T2 (metallic light blue)
CX DTR T2 Safari (silver)
2x '96 Xantia Activa (Black & metallic green)
'01 C5 2.0 HDi LX Estate (Blue)
- Stickyfinger
- (Donor 2016)
- Posts: 10435
- Joined: 28 Mar 2013, 21:05
- Location: Somset my lovleee
- My Cars: Xantia V6 ACTIVA 3ltr 24v Manual p1
Xm 2.1TD Ph2 Exclusive
AX, little Daffodil
SAXO White Mk1. Sally - x 1289
- Contact:
Re: C5 driveshaft change
Sweet, nice set up....drat, just seen your to far away
puts my recent purchase to shame
In my workshop the roof is to low so these are as high as I can go.
puts my recent purchase to shame
In my workshop the roof is to low so these are as high as I can go.
Alasdair
Activa, the Moose Rider
3x C5x7 Steering racks and counting
Activa, the Moose Rider
3x C5x7 Steering racks and counting
Re: C5 driveshaft change
for this job all you need a long bar for would be undoing the hub nut,Stickyfinger wrote:Two words Sir....Rattle Gun,...... beg steal or borrow, life is to short for 12 foot bars unless they have pumps on them and @@'s behind them.
i use a 1/2 inch drive 2 foot knuckle bar with a 4 foot scaffold tube slid all the way over it, and just use continuous pressure ( do not bounce on it ) as this is what shears these knuckle bar,
also add to Richards option i would disconnect the track rod end as well, as this allows the strut to move round out of the way more freely,
be very careful on rotating the strut that you do not over strain the drop link ball joints, as they can pop out
Regards, malcolm.
current ride a BX 1.7 TZD estate
1986 MK1 BX 1.9na D Auto(in Mothman Andy's stable )
layed up roppy 1.9TD XANT estate, now gone to meet her maker
purple and lilac metalic 2CV(VIOLET)registered to her in doors
1972 DS special been layed up aprox 31 years
current ride a BX 1.7 TZD estate
1986 MK1 BX 1.9na D Auto(in Mothman Andy's stable )
layed up roppy 1.9TD XANT estate, now gone to meet her maker
purple and lilac metalic 2CV(VIOLET)registered to her in doors
1972 DS special been layed up aprox 31 years
-
- Posts: 1366
- Joined: 30 Oct 2012, 22:37
- Location: Chelmsford, Essex
- My Cars: Two C5's...
Lots of CXs...
A couple of Xantia...
A C2...
Lots of Prelude's...
And a Sunny! - x 66
- Contact:
Re: C5 driveshaft change
Thanks guys
There's quite a bit more aggro that goes with tnstalling the four poster than with those drive on tipping ramps you've picked up though stickyfinger - if I'd gone with those, it would have saved me months of hassle and a not insignificant amount of C40 concrete and personal labour, so don't be too overawed. You'll be in action with them far quicker than I was with this!
There's quite a bit more aggro that goes with tnstalling the four poster than with those drive on tipping ramps you've picked up though stickyfinger - if I'd gone with those, it would have saved me months of hassle and a not insignificant amount of C40 concrete and personal labour, so don't be too overawed. You'll be in action with them far quicker than I was with this!
--
Iain
1x '85 CX GTi Turbo s1 (metallic blue)
2x '85 CX GTi Turbo s2 t1 (metallic silver & grey)
'88 CX GTi Turbo s2 T2 (metallic light blue)
CX DTR T2 Safari (silver)
2x '96 Xantia Activa (Black & metallic green)
'01 C5 2.0 HDi LX Estate (Blue)
Iain
1x '85 CX GTi Turbo s1 (metallic blue)
2x '85 CX GTi Turbo s2 t1 (metallic silver & grey)
'88 CX GTi Turbo s2 T2 (metallic light blue)
CX DTR T2 Safari (silver)
2x '96 Xantia Activa (Black & metallic green)
'01 C5 2.0 HDi LX Estate (Blue)
- Stickyfinger
- (Donor 2016)
- Posts: 10435
- Joined: 28 Mar 2013, 21:05
- Location: Somset my lovleee
- My Cars: Xantia V6 ACTIVA 3ltr 24v Manual p1
Xm 2.1TD Ph2 Exclusive
AX, little Daffodil
SAXO White Mk1. Sally - x 1289
- Contact:
Re: C5 driveshaft change
IF I can get them....FAILED today, Mother took ill , will go Saturday now.wurlycorner wrote:You'll be in action with them far quicker than I was with this!
But still jealous, you have made a great facility there.
Alasdair
Activa, the Moose Rider
3x C5x7 Steering racks and counting
Activa, the Moose Rider
3x C5x7 Steering racks and counting