Hi,
Does anyone know if there is a waterproof cover available for the Sensodrive Gearbox ECU please ?
It is in a very low position on the end of the gearbox and very susceptible to water ingress, as I have just found to my cost - Does it need to be mounted so low and actually on the gearbox ? It is basically just sending electrical signals to the gearbox selector unit and clutch actuator unit, so why does it need to be mounted in that position ?
C3 Sensodrive Gearbox ECU Waterproofing
Moderator: RichardW
-
- Posts: 26
- Joined: 17 Sep 2012, 13:29
- Location: Lancashire
- My Cars:
Re: C3 Sensodrive Gearbox ECU Waterproofing
You could make your own. Not standard Denso tape as I mentioned though. There is a fireproof version, but not freely available. I have sealed the joints in my ecu boxes with black RTV sealant. The are at the rear of car under the floor.
Citroen C5 1.6 HDI 110bhp Estate 06 plate
French Mistresses gone.
Citroen C5 HDI Mk 1 hatchback
Vel Satis 3.5 v6
ZX 1.9D Est.
ZX 1.9DHatch
Xantia 1.9td est.
Xantia 2.0 hdi Est.
Xantia V6 MK1
Xantia V6 MK 2
French Mistresses gone.
Citroen C5 HDI Mk 1 hatchback
Vel Satis 3.5 v6
ZX 1.9D Est.
ZX 1.9DHatch
Xantia 1.9td est.
Xantia 2.0 hdi Est.
Xantia V6 MK1
Xantia V6 MK 2