XM parts FYI

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
KP
Posts: 3980
Joined: 10 Jul 2006, 12:11
Location: Warrington
My Cars:
x 27

XM parts FYI

Post by KP »

Just icnase anyone is interested, i've stuck this up on the Club-XM site but maybe i can draw a wider audience here including non UK souls :)

In the next month or so im looking at getting the below made up for the XM 2.1td

FULL sills(to be sold as pairs, and lets face it, if you do one the other wont be far behind!)
Cooling hoses in silicone(both large rad hoses, both header tank hoses and either both for the cooler or a bypass pipe made up with 2 blanking plugs included to bypass and lock off the oil cooler so should it ever leak then the oil wont go anywhere or cause any issues)

So far i have a few takers but ideally wanting at least 10 takers for each as i'll be funding it from my own pocket most likely but will also happily ship internationally. The sills though would need to be a few sets being shipped as shipping will be monstrous on those bad boys due to length and the required packing(they will have wood supports to avoid any bending or twisting in shipping)
Post Reply