Xantia S2 V6 Engine mount
Moderator: RichardW
Xantia S2 V6 Engine mount
The one on the top left of the engine mounting it to the drivers side. Hefty rubber bushing.
Totally perished and split. Can anyone cost one up for me? I imagine one has to buy the whole assembly and it's not cheap...
Totally perished and split. Can anyone cost one up for me? I imagine one has to buy the whole assembly and it's not cheap...
- CitroJim
- A very naughty boy
- Posts: 49661
- Joined: 30 Apr 2005, 23:33
- Location: Paggers
- My Cars: Bluebell the AX, Polly the C3 Picasso, Pix the Nissan Pixo, Propel the duathlon bike, TCR Pro the road bike and Fuji the TT bike...
- x 6204
- Contact:
Re: Xantia S2 V6 Engine mount
Mike, don't quote me but I think it may be NFP now...
An alternative is to see if KingAS will rebuild it as he does XM Strut Tops...
email him at info@elastomer.eu with pictures and descriptions and see what he has to say. I'll almost put money on him wanting 75 funny things plus VAT and carriage.
An alternative is to see if KingAS will rebuild it as he does XM Strut Tops...
email him at info@elastomer.eu with pictures and descriptions and see what he has to say. I'll almost put money on him wanting 75 funny things plus VAT and carriage.
Jim
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
Re: Xantia S2 V6 Engine mount
Jim, you do surprise me when you say it might be NFP ...... It looks totally ruined really doesn't it?
£300 Xantia project with T&T anyone?
£300 Xantia project with T&T anyone?
Re:
It's becoming too problematic for me to be arsed with Addo. It's not that I can't do it, I can't be bothered. I'm trying to find your post about fitting Xantia seats in a Berlingo..addo wrote:People like SASIC sell new inserts for a lot of those applications. Not OEM quality but quite decent.
EDIT: Problematic is the wrong word. It runs, and it goes well. The engine and box are fine. There are lots of little niggles and as Jim has found, there are better things to do than spend all our time buggering about with broken cars!
Re: Xantia S2 V6 Engine mount
Mike if you send me the last 8 digits of your chassis/VIN No. i will get the OE price and part No.,
which if you dont like the price you can do a gooooogly search with the No. to see if you can fin one NOS
which if you dont like the price you can do a gooooogly search with the No. to see if you can fin one NOS
Regards, malcolm.
current ride a BX 1.7 TZD estate
1986 MK1 BX 1.9na D Auto(in Mothman Andy's stable )
layed up roppy 1.9TD XANT estate, now gone to meet her maker
purple and lilac metalic 2CV(VIOLET)registered to her in doors
1972 DS special been layed up aprox 31 years
current ride a BX 1.7 TZD estate
1986 MK1 BX 1.9na D Auto(in Mothman Andy's stable )
layed up roppy 1.9TD XANT estate, now gone to meet her maker
purple and lilac metalic 2CV(VIOLET)registered to her in doors
1972 DS special been layed up aprox 31 years
Re: Re: Xantia S2 V6 Engine mount
VF7**************[VIN obfuscated, can be read by forum staff] is the VIN Malcolm.citronut wrote:Mike if you send me the last 8 digits of your chassis/VIN No. i will get the OE price and part No.,
which if you dont like the price you can do a gooooogly search with the No. to see if you can fin one NOS
It's not just that that's made me feel like giving up. The wiring issues are annoying, not sure I can be arsed with taking bumpers off and trying to work out what wrong.
Enviado desde mi GT-I9505 usando Tapatalk
Re: Xantia S2 V6 Engine mount
here is price and part No. that comes S/C comes up with on your VIN No.
Part Number Description Quantity Price excl. VAT Price incl. VAT Total incl. VAT Selection
0000180620 HOOK ANTICOUPLE 40.70 GBP 48.84 GBP 48.84 GBP
as Jim says its showing as NFP,
although you can non the less ask your local dealer to do an all dealer search,
the other thing i noticed is in your pucy its looks like the bush is laying on its side in situe, but in the drawing on S/C it looks to be sitting on its edge????
Part Number Description Quantity Price excl. VAT Price incl. VAT Total incl. VAT Selection
0000180620 HOOK ANTICOUPLE 40.70 GBP 48.84 GBP 48.84 GBP
as Jim says its showing as NFP,
although you can non the less ask your local dealer to do an all dealer search,
the other thing i noticed is in your pucy its looks like the bush is laying on its side in situe, but in the drawing on S/C it looks to be sitting on its edge????
Regards, malcolm.
current ride a BX 1.7 TZD estate
1986 MK1 BX 1.9na D Auto(in Mothman Andy's stable )
layed up roppy 1.9TD XANT estate, now gone to meet her maker
purple and lilac metalic 2CV(VIOLET)registered to her in doors
1972 DS special been layed up aprox 31 years
current ride a BX 1.7 TZD estate
1986 MK1 BX 1.9na D Auto(in Mothman Andy's stable )
layed up roppy 1.9TD XANT estate, now gone to meet her maker
purple and lilac metalic 2CV(VIOLET)registered to her in doors
1972 DS special been layed up aprox 31 years
Re: Xantia S2 V6 Engine mount
Thanks Malcolm. It's a bad picture taken at an angle. I'll take a better one, but the whole thing should be horizontal.
- CitroJim
- A very naughty boy
- Posts: 49661
- Joined: 30 Apr 2005, 23:33
- Location: Paggers
- My Cars: Bluebell the AX, Polly the C3 Picasso, Pix the Nissan Pixo, Propel the duathlon bike, TCR Pro the road bike and Fuji the TT bike...
- x 6204
- Contact:
Re: Xantia S2 V6 Engine mount
I'd be worried if it wasn't!northern_mike wrote:the whole thing should be horizontal.
Jim
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
-
- Posts: 1626
- Joined: 26 Feb 2004, 23:21
- Location: Cloud Cuckooland
- My Cars: C5 V6 Mk1 assainated by wife
Renault Kangoo 1.6 auto, tarted up and remapped
Still missing the Xantia V6
Not missing the AX - Contact:
Re: Xantia S2 V6 Engine mount
Mine went like that on my old Xantia so I just got a regular engine mount bush off of ebay that was the nearest size then 'made' it fit
It infuriates me to be wrong when I know I'm right
Lexia ponce
http://perception.dyndns.biz/~avengineering/index.htm
Lexia ponce
http://perception.dyndns.biz/~avengineering/index.htm
Re: Xantia S2 V6 Engine mount
im told you can make anything fit with a big enough persuader/hammerStempy wrote:Mine went like that on my old Xantia so I just got a regular engine mount bush off of ebay that was the nearest size then 'made' it fit
Regards, malcolm.
current ride a BX 1.7 TZD estate
1986 MK1 BX 1.9na D Auto(in Mothman Andy's stable )
layed up roppy 1.9TD XANT estate, now gone to meet her maker
purple and lilac metalic 2CV(VIOLET)registered to her in doors
1972 DS special been layed up aprox 31 years
current ride a BX 1.7 TZD estate
1986 MK1 BX 1.9na D Auto(in Mothman Andy's stable )
layed up roppy 1.9TD XANT estate, now gone to meet her maker
purple and lilac metalic 2CV(VIOLET)registered to her in doors
1972 DS special been layed up aprox 31 years
Re: Xantia S2 V6 Engine mount
I am aware I can break pretty much anything with a big hammer. I have proven this many times in the past. I go along the lines "If it doesn't move, hit it harder with a bigger hammer. If it breaks, it was knackered anyway",,citronut wrote:im told you can make anything fit with a big enough persuader/hammerStempy wrote:Mine went like that on my old Xantia so I just got a regular engine mount bush off of ebay that was the nearest size then 'made' it fit