LHM brake seals

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

KP
Posts: 3980
Joined: 10 Jul 2006, 12:11
Location: Warrington
My Cars:
x 27

Re: LHM brake seals

Post by KP »

I can find brembos easily enough. The handbrake but would worry me a little but then if the engine died and I needed to brake... Clutch and a gear would do at worst!

Well I'm going to order the bits next week but will be getting the calipers soon as well so will see what happens.
May change tack if a C5/c6 set come up cheap!
Northern_Mike

Re: LHM brake seals

Post by Northern_Mike »

KP wrote:I can find brembos easily enough. The handbrake but would worry me a little
I imagine it's an off-road or track car as you're not concerned about it bothering an MOT tester?.. :)
KP
Posts: 3980
Joined: 10 Jul 2006, 12:11
Location: Warrington
My Cars:
x 27

Re: LHM brake seals

Post by KP »

It would bother the mot tester as citroen intended it. After that....

Though my distractions tonight have taken me off track as I plainly forgot the c5 stuff is useless for a xantia :(

Maybe an xm caliper is twin pot...
KP
Posts: 3980
Joined: 10 Jul 2006, 12:11
Location: Warrington
My Cars:
x 27

Re: LHM brake seals

Post by KP »

Well the xm route is no good.

The 2.5 and v6 have the biggest front setup and they use a single pot caliper as well :(

Maybe what I think of doesn't exist in lhm land ;(
Post Reply