a customer of mine has an L reg Xant 1.9TD hatch,
he purchased a new repair piece/block/clip from ebay
http://tinyurl.com/obx5u3b" onclick="window.open(this.href);return false;
on checking/trying to fit this block,
although the listing states it fits 1990 – 2002 cars, there is no way i can see it fitting the regulator from my customers car,
as this block requires two cable end nipples one coming from each end/direction,
as does this type
http://tinyurl.com/ph6fx5g" onclick="window.open(this.href);return false;
the regulator i am trying to sort has a single straight/run of cable with two nipple/crimps no more that 3/8'ths of an inch apart from each other,
these crimps are what the block attaches over and onto the cable,
on a MK2 regulator the block is attached on two separate cable end nipples, as im sure the new block requires
any input gratefully received
MK1 XANT window reg
Moderator: RichardW
MK1 XANT window reg
Regards, malcolm.
current ride a BX 1.7 TZD estate
1986 MK1 BX 1.9na D Auto(in Mothman Andy's stable )
layed up roppy 1.9TD XANT estate, now gone to meet her maker
purple and lilac metalic 2CV(VIOLET)registered to her in doors
1972 DS special been layed up aprox 31 years
current ride a BX 1.7 TZD estate
1986 MK1 BX 1.9na D Auto(in Mothman Andy's stable )
layed up roppy 1.9TD XANT estate, now gone to meet her maker
purple and lilac metalic 2CV(VIOLET)registered to her in doors
1972 DS special been layed up aprox 31 years