One for Paul, maybe? I'm looking at a new (BGA) gasket and wondering.
On a PRV motor, which end carries oil to the camshaft - or is it both?
At the head gasket end with two little "ears" there's a hole about 5/16 inch that's beaded with sealant, just near a head bolt hole.
At the end with one tab and the identifying notches, there's a slightly larger hole (with sealant beading) near one of the dowelled head bolt holes.
Would help my thought processes to know which one it is (or both!) that carries the oil pressure up. I presume spent oil returns via the cam chain area.
Ta, Adam.
PRV Head Oilways
Moderator: RichardW
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- Location: Somewhere in North Wales, Anglesey
- My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto
2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising - x 70
Re: PRV Head Oilways
One for Mathew. He has had more PRVs apart more then me!!
Sorry Adam.. Ive not had them apart yet amazingly!
Sorry Adam.. Ive not had them apart yet amazingly!
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- Location: Somewhere in North Wales, Anglesey
- My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto
2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising - x 70
Re: PRV Head Oilways
Yes adam..
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto