My front window went pop today - it's fallen off the winder.
I've got the green clip and rubber grommet as seen in this thread
http://www.frenchcarforum.co.uk/forum/v ... ow#p273682" onclick="window.open(this.href);return false;
and also the metal clip bit.
I've replaced the clip once before (rather more annoying, the thing was unwound), and all I remember about refitting the window to the clip was that it was an utter pig.
I can't remember which order things go in - anybody able to remind me?
Fitting Xantia front window clip
Moderator: RichardW
- CitroJim
- A very naughty boy
- Posts: 49526
- Joined: 30 Apr 2005, 23:33
- Location: Paggers
- My Cars: Bluebell the AX, Polly the C3 Picasso, Pix the Nissan Pixo, Propel the duathlon bike, TCR Pro the road bike and Fuji the TT bike...
- x 6160
- Contact:
Re: Fitting Xantia front window clip
No, my only recall of the job is that it's a bit of a devil...
I'm not really sure what you mean by order of things? Can you elucidate a little further?
I'm not really sure what you mean by order of things? Can you elucidate a little further?
Jim
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
- KennyW
- (Donor 2022)
- Posts: 2499
- Joined: 17 Jan 2006, 21:22
- Location: Letham, Fife
- My Cars: Current Citroen's
C5 x7 2010
SWMBO C3 2012
Previous Citroen's
Xantia 2.0 90hp estate
Xantia 1.9 TD estate - x 132
Re: Fitting Xantia front window clip
Fit rubber grommet in first in window glass, fit window glass and grommet onto white plastic ball on window mechanism then push metal clip to secure.
simples
Kenny
simples
Kenny
C5 x7 2.0 HDi 160 hp Estate exclusive, the newbie
Xantia 2.0 Hdi 90hp 1999 only 189,000 and rising!!!!!!! Moved on to a new home
C3 1.4 petrol (SWMBO)
Xantia TD 1.9 Mk 2 Estate LX 1998 model over 210,000 miles now and still rising!!!!!!!!!!!!! now deceased 17/12/2010.
Xantia 2.0 Hdi 90hp 1999 only 189,000 and rising!!!!!!! Moved on to a new home
C3 1.4 petrol (SWMBO)
Xantia TD 1.9 Mk 2 Estate LX 1998 model over 210,000 miles now and still rising!!!!!!!!!!!!! now deceased 17/12/2010.
- CitroJim
- A very naughty boy
- Posts: 49526
- Joined: 30 Apr 2005, 23:33
- Location: Paggers
- My Cars: Bluebell the AX, Polly the C3 Picasso, Pix the Nissan Pixo, Propel the duathlon bike, TCR Pro the road bike and Fuji the TT bike...
- x 6160
- Contact:
Re: Fitting Xantia front window clip
That's a great explanation Kenny All very clear now...KennyW wrote: simples
Jim
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
Re: Fitting Xantia front window clip
Metal clip on regulator side or the other side?
Re: Fitting Xantia front window clip
The metal clip goes on the window glass side,
make sure the clip is already inserted halfway into the rubber before inserting into the glass.
The clip can be really difficult to push into place, I replaced one the other day and found an easy way to push the clip home!
With the clip & rubber located, I rotated the clip so it faced the front of the door.
I then got a small flat peice of wood, about 2"wide x 1" high & 5-6" long,
I then reached into the door with one hand holding the wood, through where the speaker is normally located.
I then slid the wood block along the glass until it touched the clip.
Once in place you can push the wood against the clip making it easy to install the clip.
I had the window down so that the clip is visible near to the window regulator.
I hope this helps?
make sure the clip is already inserted halfway into the rubber before inserting into the glass.
The clip can be really difficult to push into place, I replaced one the other day and found an easy way to push the clip home!
With the clip & rubber located, I rotated the clip so it faced the front of the door.
I then got a small flat peice of wood, about 2"wide x 1" high & 5-6" long,
I then reached into the door with one hand holding the wood, through where the speaker is normally located.
I then slid the wood block along the glass until it touched the clip.
Once in place you can push the wood against the clip making it easy to install the clip.
I had the window down so that the clip is visible near to the window regulator.
I hope this helps?
'99 xantia Exclusive 110HDi Estate
Previous;
'99 xantia SX 110HDi Estate
'00 xantia Sx 90HDi Estate
'96 xantia estate 1.9td
BX Estate 1.9 non Turbo
Previous;
'99 xantia SX 110HDi Estate
'00 xantia Sx 90HDi Estate
'96 xantia estate 1.9td
BX Estate 1.9 non Turbo