c5 mark 1 repeater indicator

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
c52002
Posts: 12
Joined: 19 Apr 2013, 19:38
Location:
My Cars:

c5 mark 1 repeater indicator

Post by c52002 »

Hi guys, I need help?
The repeater indicator on the passenger side wing has never worked, and I found out why ! there is no wire going to it. I have found a connector from a scrapper and was wondering if it is ok to connect it to the wire loom going into the back of the headlight unit. If you have any tips or advice about this please get in touch.

Many thanks Kev.
Top
Stewart(oily)
Posts: 894
Joined: 07 Oct 2005, 16:31
Location: North Wales
My Cars: Citroens since 1990, BX Diesel, GTI, TZD with 1.9 TD running extra boost before it was fashionable!, ZX Volcane TD, S2 Xantia break 1.9TD, Xantia HDI 110, currently zipping about in a C2 Diesel. C2 died from the dreaded worm, C3 Picasso HDI Exclusive, the adventure continues.
x 31

Re: c5 mark 1 repeater indicator

Post by Stewart(oily) »

The original wire is probably floating about behind the wing :)
BXs since 1993 built 1.9 TZD turbo, got a S2 Xantia estate, brilliant car! 2013, Xantia HDI LX 110 2000 new car with 122,000, l C2 HDI Rusty rocket, C3 Picasso HDI new to me.
Top
c52002
Posts: 12
Joined: 19 Apr 2013, 19:38
Location:
My Cars:

Re: c5 mark 1 repeater indicator

Post by c52002 »

Hi Stewart I've looked it has definately gone. The cable sheathing is there but no wire.
Top
c52002
Posts: 12
Joined: 19 Apr 2013, 19:38
Location:
My Cars:

Re: c5 mark 1 repeater indicator

Post by c52002 »

all solved! I traced the wire through to the area where the bonnet meets the window screen, there is a plastic bezle with vents in it which goes all the way across the car, if you release this then you can get access to the wire which was there but had been snipped off, I extended the wire and connected a new end to the bulb housing and bingo it all works.

thanks for the replies. Kev
Top
Post Reply

Return to “Citroën”