Hi
Help please with a water temp warning light which only comes on when the heater is running (stop light doesn't flash). I checked under the car and found water leaking through a chassis rail at the bulkhead, pretty much beneath the heater location. Anyone had a similar problem and is it likely to be heater rad or the pipework to/from it?
If rad, has anyone changed one and how do I go about it?
Also just rebushed the rear beam, bought new flexi brake lines but rounded the nut on the rigid line to the drum (didn't use proper brake spanner) - anyone know where I can get an after market ridgid line (nearside)?
Cheers
Chris
2000 2.0l Hdi Synergie - tatty round the edges, but a great mule
2000 2.0l Hdi Synergie Water Temp Warning Light
Moderator: RichardW
-
- Posts: 894
- Joined: 07 Oct 2005, 16:31
- Location: North Wales
- My Cars: Citroens since 1990, BX Diesel, GTI, TZD with 1.9 TD running extra boost before it was fashionable!, ZX Volcane TD, S2 Xantia break 1.9TD, Xantia HDI 110, currently zipping about in a C2 Diesel. C2 died from the dreaded worm, C3 Picasso HDI Exclusive, the adventure continues.
- x 31
Re: 2000 2.0l Hdi Synergie Water Temp Warning Light
Any half decent motorfactor should be able to make you up a metal brake pipe, as for the leaking heater matrix Citroen recommend Forte stop leak, if you are lucky it might work, if you are losing coolant you need to be very careful.
BXs since 1993 built 1.9 TZD turbo, got a S2 Xantia estate, brilliant car! 2013, Xantia HDI LX 110 2000 new car with 122,000, l C2 HDI Rusty rocket, C3 Picasso HDI new to me.