Please ID this broken part

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
User avatar
Tully
Posts: 27
Joined: 02 Apr 2013, 12:02
Location:
My Cars:

Please ID this broken part

Post by Tully »

Hi Everyone

I've recently noticed this broken pushrod on the right hand side of my engine (2.2 HDi). Pics attached.
engine front.jpg
broken pushrod.jpg
I spotted it just before I started a 500 mile trip from Scotland back home to Devon and it made no difference to performance or economy.
Can anyone tell me what it does and how I can get a replacement.

Thanks

Tully
Craig

C5 2.2 hdi exclusive semi-auto
Seat Alhambra 1.9 tdi (Cavey-mobile)
GPZ750R modified (for sale)
Missing my Saab 9-3
RustyUK
Posts: 91
Joined: 12 Feb 2008, 22:35
Location: Pontefract
My Cars: Citroen C5 X7 2.0 Hdi Saloon
Toyota Aygo (C1/107!)
Dodge Caliber SXT 1.8 (for sale...)
x 2

Re: Please ID this broken part

Post by RustyUK »

It's the swirl valve actuator. A vacuum diaphragm that pulls the rod allowing air into the other 4 inlet valves at high load. Normally these 16v engines only use 4 inlet valves (1 per cylinder), the remaining 4 blocked off by butterfly valves in the head. This thing opens those valves allow fast moving air to swirl its way into the cylinders, the theory being this system gives better fuel economy.

I replaced mine without too much fuss entirely from above the engine, but it is fiddly. Around £20 from any Citroen / Peugeot dealer.
User avatar
Tully
Posts: 27
Joined: 02 Apr 2013, 12:02
Location:
My Cars:

Re: Please ID this broken part

Post by Tully »

Thanks RustyUK

I've seen new ones on ebay for around £21. I'll maybe try a spot of Araldite in the meantime.
Craig

C5 2.2 hdi exclusive semi-auto
Seat Alhambra 1.9 tdi (Cavey-mobile)
GPZ750R modified (for sale)
Missing my Saab 9-3
Post Reply