xantia 110 hdi clutch

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

RichardW
Forum Treasurer
Posts: 10813
Joined: 07 Aug 2002, 17:12
Location: United Kingdom
My Cars: MK2 '17 C4GP 1.6 BlueHDi 120
'13 3008 1.6 HDi GripControl
x 984

Re: xantia 110 hdi clutch

Post by RichardW »

Don't think the washers are required - should be easy enough with the gearbox out of the way - access is pretty limited normally, but if you wind the steering onto full LH lock with the box out, the joint shold be right there exposed at the back of the engine bay :lol:

I doubt that taking the box out is normally a good way to do this job though :mrgreen:
Richard W
citroenxm
Posts: 8061
Joined: 30 Dec 2004, 23:10
Location: Somewhere in North Wales, Anglesey
My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto

2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising
x 70

Re: xantia 110 hdi clutch

Post by citroenxm »

They list two because there's two sizes fitted.. the smaller threaded one is fitted to HDi 90 models and the larger i think m16 is fitted to hdi 110 models. ..
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project

A very sad...
1994 XM 2.1 d auto
taffy
Posts: 1018
Joined: 08 Oct 2012, 00:35
Location: swindon
My Cars:
x 1

Re: xantia 110 hdi clutch

Post by taffy »

citroenxm wrote:They list two because there's two sizes fitted.. the smaller threaded one is fitted to HDi 90 models and the larger i think m16 is fitted to hdi 110 models. ..
oh christ i hope ive got the right one!
99 silver 2.1td exclusive xantia
99 red 2.0 hdi exclusive xantia..
00 black 2.0 hdi exclusive xantia
99 blue 2.0 hdi exclusive xantia
06 silver 1.6 hdi vtr c5
57 blue C4 GP 1.6hdi exclusive
08 black C4 GP 2.0hdi vtr
taffy
Posts: 1018
Joined: 08 Oct 2012, 00:35
Location: swindon
My Cars:
x 1

Re: xantia 110 hdi clutch

Post by taffy »

right im readt to go my driveshaft seals jus come through letter box!!
but its raining.....but ive got no choice
tarpaulin will have to be sourced lmao!!
99 silver 2.1td exclusive xantia
99 red 2.0 hdi exclusive xantia..
00 black 2.0 hdi exclusive xantia
99 blue 2.0 hdi exclusive xantia
06 silver 1.6 hdi vtr c5
57 blue C4 GP 1.6hdi exclusive
08 black C4 GP 2.0hdi vtr
taffy
Posts: 1018
Joined: 08 Oct 2012, 00:35
Location: swindon
My Cars:
x 1

Re: xantia 110 hdi clutch

Post by taffy »

well I started yesterday midday and by last night had box off and clutch...this morning I'm doin wishbones and antiroll bushs....all I can say its a job and a half! And The box is mega heavy...I can't even lift it into place....broke one driveshaft intermediate was in The bearing housing proper had to beat it out and its distorted now...thank god that's only damage I've done so far...clutch was interestin...was thinking would have to skim flywheel but was ok however The pessure plate was bad and even springs had started rubbin...oh well bk to it...
99 silver 2.1td exclusive xantia
99 red 2.0 hdi exclusive xantia..
00 black 2.0 hdi exclusive xantia
99 blue 2.0 hdi exclusive xantia
06 silver 1.6 hdi vtr c5
57 blue C4 GP 1.6hdi exclusive
08 black C4 GP 2.0hdi vtr
citronut
Posts: 10937
Joined: 29 Apr 2005, 00:46
Location: United Kingdom east sussex
My Cars:
x 92

Re: xantia 110 hdi clutch

Post by citronut »

taffy wrote:well I started yesterday midday and by last night had box off and clutch...this morning I'm doin wishbones and antiroll bushs....all I can say its a job and a half! And The box is mega heavy...I can't even lift it into place....broke one driveshaft intermediate was in The bearing housing proper had to beat it out and its distorted now...thank god that's only damage I've done so far...clutch was interestin...was thinking would have to skim flywheel but was ok however The pessure plate was bad and even springs had started rubbin...oh well bk to it...
how dod you manage to detroy the intermediate bearing, as the bit you hit is a spacer collar which is against the bearing,
Regards, malcolm.

current ride a BX 1.7 TZD estate
1986 MK1 BX 1.9na D Auto(in Mothman Andy's stable )
layed up roppy 1.9TD XANT estate, now gone to meet her maker
purple and lilac metalic 2CV(VIOLET)registered to her in doors
1972 DS special been layed up aprox 31 years
taffy
Posts: 1018
Joined: 08 Oct 2012, 00:35
Location: swindon
My Cars:
x 1

Re: xantia 110 hdi clutch

Post by taffy »

Well got box on clutch working jus need to sorce another drive shaft...wishbones were knackered not a fun job a
99 silver 2.1td exclusive xantia
99 red 2.0 hdi exclusive xantia..
00 black 2.0 hdi exclusive xantia
99 blue 2.0 hdi exclusive xantia
06 silver 1.6 hdi vtr c5
57 blue C4 GP 1.6hdi exclusive
08 black C4 GP 2.0hdi vtr
taffy
Posts: 1018
Joined: 08 Oct 2012, 00:35
Location: swindon
My Cars:
x 1

Re: xantia 110 hdi clutch

Post by taffy »

And it was The driveshaft little bearing they came out everywhere
99 silver 2.1td exclusive xantia
99 red 2.0 hdi exclusive xantia..
00 black 2.0 hdi exclusive xantia
99 blue 2.0 hdi exclusive xantia
06 silver 1.6 hdi vtr c5
57 blue C4 GP 1.6hdi exclusive
08 black C4 GP 2.0hdi vtr
User avatar
CitroJim
A very naughty boy
Posts: 49526
Joined: 30 Apr 2005, 23:33
Location: Paggers
My Cars: Bluebell the AX, Polly the C3 Picasso, Pix the Nissan Pixo, Propel the duathlon bike, TCR Pro the road bike and Fuji the TT bike...
x 6160
Contact:

Re: xantia 110 hdi clutch

Post by CitroJim »

I believe that with a little ingenuity that bearing can be replaced Taffy.. It's a pretty standard sort and can be sourced (I believe) from generic bearing suppliers at an economical cost.

Getting the old one off is not a problem as it almost is and all you'll beed to do is fabricate a long hollow mandrel (a piece of scaffold tube perhaps) to drive the new one home..

If you know the dimensions, shielding and ball-count then this mob should be able to supply...
Jim

Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
RichardW
Forum Treasurer
Posts: 10813
Joined: 07 Aug 2002, 17:12
Location: United Kingdom
My Cars: MK2 '17 C4GP 1.6 BlueHDi 120
'13 3008 1.6 HDi GripControl
x 984

Re: xantia 110 hdi clutch

Post by RichardW »

It's still available from Citroen - but does cost £21 :evil: says its 35 x 62 x 16 - I imagine it's a metal sealed bearing. Unfortunately seems to be a non std size (there's a surprise :lol: ) - simply bearings list 14 and 18mm but not 16mm. I'd have thought a 14 would do it - take the slack up in the retaining bolts. A more reasonable £5 or so :wink:
Richard W
taffy
Posts: 1018
Joined: 08 Oct 2012, 00:35
Location: swindon
My Cars:
x 1

Re: xantia 110 hdi clutch

Post by taffy »

Its The small neadles I've lost inside The inner cv joint as I was so stubbon to remove intermediate it poped off and went everywhere...I am gona do The shaft bearing but at The mo I'm under pressure to get bk to work so I gota get car bk on road asap....I've had a good look inside engine bay now and I'm appauled how citroen pipe theses cars it jus looks so messy! I've done wishbones drop links gota do inner tie but couldn get rubberoff also gota do ball joints again...quick question on rear engine mount is it better to take The bracket off? Thanks for ur support gents
99 silver 2.1td exclusive xantia
99 red 2.0 hdi exclusive xantia..
00 black 2.0 hdi exclusive xantia
99 blue 2.0 hdi exclusive xantia
06 silver 1.6 hdi vtr c5
57 blue C4 GP 1.6hdi exclusive
08 black C4 GP 2.0hdi vtr
User avatar
CitroJim
A very naughty boy
Posts: 49526
Joined: 30 Apr 2005, 23:33
Location: Paggers
My Cars: Bluebell the AX, Polly the C3 Picasso, Pix the Nissan Pixo, Propel the duathlon bike, TCR Pro the road bike and Fuji the TT bike...
x 6160
Contact:

Re: xantia 110 hdi clutch

Post by CitroJim »

Ahh sorry Taffy, I mis-read what bearing you were speaking of...

I guess you mean the tripod ones inside the CV joint..

If you can find all of the spilt needles you can rebuild it...
Jim

Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
citronut
Posts: 10937
Joined: 29 Apr 2005, 00:46
Location: United Kingdom east sussex
My Cars:
x 92

Re: xantia 110 hdi clutch

Post by citronut »

if you send me the last 8 digits of your chassis/VIN No., i will check which shaft fits your car and do an all families search to check which other models use the same shaft,
then you can try and get one from the breakers,

all being you cant find all the needle rollers
Regards, malcolm.

current ride a BX 1.7 TZD estate
1986 MK1 BX 1.9na D Auto(in Mothman Andy's stable )
layed up roppy 1.9TD XANT estate, now gone to meet her maker
purple and lilac metalic 2CV(VIOLET)registered to her in doors
1972 DS special been layed up aprox 31 years
taffy
Posts: 1018
Joined: 08 Oct 2012, 00:35
Location: swindon
My Cars:
x 1

Re: xantia 110 hdi clutch

Post by taffy »

well in The end I found another driveshaft of a 90 and used The neadle bearings from that and went together well.....clutch feels good but engine mounts lettin it down now...
99 silver 2.1td exclusive xantia
99 red 2.0 hdi exclusive xantia..
00 black 2.0 hdi exclusive xantia
99 blue 2.0 hdi exclusive xantia
06 silver 1.6 hdi vtr c5
57 blue C4 GP 1.6hdi exclusive
08 black C4 GP 2.0hdi vtr
taffy
Posts: 1018
Joined: 08 Oct 2012, 00:35
Location: swindon
My Cars:
x 1

Re: xantia 110 hdi clutch

Post by taffy »

Oh and another thing...The ride height of The car is really high will it settle in time or have I done something lol
99 silver 2.1td exclusive xantia
99 red 2.0 hdi exclusive xantia..
00 black 2.0 hdi exclusive xantia
99 blue 2.0 hdi exclusive xantia
06 silver 1.6 hdi vtr c5
57 blue C4 GP 1.6hdi exclusive
08 black C4 GP 2.0hdi vtr
Post Reply