accelerator "R" clip
Moderator: RichardW
- froggy
- Donor 2023
- Posts: 640
- Joined: 05 Jul 2010, 20:24
- Location: too far from citrojim"s
- My Cars: S2 Xantia Forte 185435.
Peugeot 306 Meridian, the boss. - x 2
accelerator "R" clip
Hi, my spring clip that fits on my accelerator cable, has dropped off! ( Xantia) it tensions the cable , I think? How do you tension it? I guess it fits against the washer, any help gratefully received, thanks inadvance Terry .
Terry
Xantia TD lx series1 SORN
Peugeot 306 meridian [ the boss]
Xantia HDI Forte 1997 CC
Xantia TD lx series1 SORN
Peugeot 306 meridian [ the boss]
Xantia HDI Forte 1997 CC
Re: accelerator "R" clip
just pull the slack out then position the clip as you said make sure there is still a very small amount of slack left
C5 2.0 HDI VTR 2003 ICELANDIC GREY
306 1.4 LX MERIDIAN
306 1.4 LX MERIDIAN
-
- Posts: 371
- Joined: 29 May 2012, 21:37
- Location: London near that big building with the flashing light!
- My Cars: 2001 Xsara Picasso 2.0 HDi
- x 8
Re: accelerator "R" clip
When i lost mine while doing a bit of fiddling under bonnet as you do i used a piece of 16mm copper pipe just cut to size till had a bit of play and put on cable pump side of bracket so didnt pull through.
Or anything else that fits over cable and don't pull through hole for a stop gap
Or anything else that fits over cable and don't pull through hole for a stop gap