So my MOT failed nicely today. Mostly on welding, but a couple of other issues with the brakes that I can do myself.
Lots of work need to be done on both sills, to the point where it's almost worth replacing the whole thing (according to the tester), a couple of bits on the floor pan, and potentially a look at the strut tops.
Does anyone know any decent welders in the Ashford (Kent) area that won't charge an arm and a leg?
I'm hoping it can be rescued
Alex
The Dreaded Tin Worm....
Moderator: RichardW
The Dreaded Tin Worm....
Citroen Xantia Exclusive HDi
previously:
Citroen ZX Volcane - RIP
Peugeot 106 XN... stolen and destroyed by Kent Police
previously:
Citroen ZX Volcane - RIP
Peugeot 106 XN... stolen and destroyed by Kent Police
Re: The Dreaded Tin Worm....
Sounds fairly terminal, a pair of new cills fitted has got to be a fair wack of money plus the other welding and if the car has got to that stage its not going to go much longer, maybe its time to find a New friend?
D
D
XM Prestige PRV6 92
Talbot Express Autotrail Chinook 89
Mitsubishi L200 Trojan 14
Xantia Activa 95, sold (missed)
Service Citroen is awesome, it shows me pictures of all the parts i used to be able to buy............
Talbot Express Autotrail Chinook 89
Mitsubishi L200 Trojan 14
Xantia Activa 95, sold (missed)
Service Citroen is awesome, it shows me pictures of all the parts i used to be able to buy............
-
- (Donor 2021)
- Posts: 4625
- Joined: 27 Nov 2005, 19:07
- Location: Kent / Susssex
- My Cars: 2010 C5 X7 2.0 hdi 160 exc auto
MG TF 135
Boxer II 2.2 camper conversion
BMW R1200RT
BMW K1300 R
Honda V F R 800 5thG / MT500 Armstrong - x 39
Re: The Dreaded Tin Worm....
Alex afraid I dont know any
My xant is up for sale though.. for maybe not much more than your mot bill would be....
John
My xant is up for sale though.. for maybe not much more than your mot bill would be....
John
Re: The Dreaded Tin Worm....
I am beginning to suspect as much. When asked for an estimate, the tester shrugged and said they wouldn't take it on "but you're looking at about £600 there"....I only paid £500 for it
I've always liked Xantiae John, what sort of price are you looking for? I could be interested.
Alex
I've always liked Xantiae John, what sort of price are you looking for? I could be interested.
Alex
Citroen Xantia Exclusive HDi
previously:
Citroen ZX Volcane - RIP
Peugeot 106 XN... stolen and destroyed by Kent Police
previously:
Citroen ZX Volcane - RIP
Peugeot 106 XN... stolen and destroyed by Kent Police
-
- (Donor 2021)
- Posts: 4625
- Joined: 27 Nov 2005, 19:07
- Location: Kent / Susssex
- My Cars: 2010 C5 X7 2.0 hdi 160 exc auto
MG TF 135
Boxer II 2.2 camper conversion
BMW R1200RT
BMW K1300 R
Honda V F R 800 5thG / MT500 Armstrong - x 39
Re: The Dreaded Tin Worm....
425 alex..
well a bit more with tax on..
I may be down you're way tomorow eve if you want to look over it..
will certainly pass on 'the knowledge' of her if you interested..
well a bit more with tax on..
I may be down you're way tomorow eve if you want to look over it..
will certainly pass on 'the knowledge' of her if you interested..
Re: The Dreaded Tin Worm....
got to be worth it for that money!
D
D
XM Prestige PRV6 92
Talbot Express Autotrail Chinook 89
Mitsubishi L200 Trojan 14
Xantia Activa 95, sold (missed)
Service Citroen is awesome, it shows me pictures of all the parts i used to be able to buy............
Talbot Express Autotrail Chinook 89
Mitsubishi L200 Trojan 14
Xantia Activa 95, sold (missed)
Service Citroen is awesome, it shows me pictures of all the parts i used to be able to buy............
-
- Forum Treasurer
- Posts: 10886
- Joined: 07 Aug 2002, 17:12
- Location: United Kingdom
- My Cars: MK2 '17 C4GP 1.6 BlueHDi 120
'13 3008 1.6 HDi GripControl - x 1000
Re: The Dreaded Tin Worm....
Not the best news, but then it is 17 years old!
There are 2 things about tin worm:
1. It's always worse than it first looks after you have cleaned it out
2. Once it starts in earnest (as yours has done) it tends to be rampant and you will always be chasing it
If you have a welder then it would worth patching up the one you've got and looking for another, but if you have to pay someone else, then it's always going to be prohibitive.
There are 2 things about tin worm:
1. It's always worse than it first looks after you have cleaned it out
2. Once it starts in earnest (as yours has done) it tends to be rampant and you will always be chasing it
If you have a welder then it would worth patching up the one you've got and looking for another, but if you have to pay someone else, then it's always going to be prohibitive.
Richard W
Re: The Dreaded Tin Worm....
i do welding but would not be able to take it on this side of the ICCCR,
but there is a guy in a workshop down the back of the park who is very quick and cheap,
dont have his No. of hand but if you are interested i could drop round there and get it for you
but there is a guy in a workshop down the back of the park who is very quick and cheap,
dont have his No. of hand but if you are interested i could drop round there and get it for you
Regards, malcolm.
current ride a BX 1.7 TZD estate
1986 MK1 BX 1.9na D Auto(in Mothman Andy's stable )
layed up roppy 1.9TD XANT estate, now gone to meet her maker
purple and lilac metalic 2CV(VIOLET)registered to her in doors
1972 DS special been layed up aprox 31 years
current ride a BX 1.7 TZD estate
1986 MK1 BX 1.9na D Auto(in Mothman Andy's stable )
layed up roppy 1.9TD XANT estate, now gone to meet her maker
purple and lilac metalic 2CV(VIOLET)registered to her in doors
1972 DS special been layed up aprox 31 years