Hi all deoes anyone have the spec sheet for changing the timing belt on the 2.0 hdi 8v?
at the moment i dont have anything regarding timing and locking tools needed
many thanks
bick
relay 2.0 hdi timing belt info?
Moderator: RichardW
-
- Moderating Team
- Posts: 11577
- Joined: 02 Apr 2005, 16:11
- Location: Charmouth,Dorset
- My Cars: Currently:
C5 X7 VTR + Satnav Hdi estate Silver
C5 X7 VTR + Hdi Estate 2008 Red
In the past: 3, CX td Safaris and about 7, XM td estates. Lovely cars. - x 1206
Re: relay 2.0 hdi timing belt info?
Hi Bick
I think the Haynes manual will give you the info you need.
Peter
I think the Haynes manual will give you the info you need.
Peter
-
- Forum Treasurer
- Posts: 10890
- Joined: 07 Aug 2002, 17:12
- Location: United Kingdom
- My Cars: MK2 '17 C4GP 1.6 BlueHDi 120
'13 3008 1.6 HDi GripControl - x 1002
Re: relay 2.0 hdi timing belt info?
Info in this thread: http://www.frenchcarforum.co.uk/forum/v ... 11&t=33939
It's based on a 110 Xantia, but the principles of the belt are the same. Note that if it car is after early 2002 then the vernier cam pulley was deleted in favour of a floating crank pulley. On these you need to time the engine before undoing the crank bolt, so a crank holding tool which engages with the ring gear is essential.
It's based on a 110 Xantia, but the principles of the belt are the same. Note that if it car is after early 2002 then the vernier cam pulley was deleted in favour of a floating crank pulley. On these you need to time the engine before undoing the crank bolt, so a crank holding tool which engages with the ring gear is essential.
Richard W
Re: relay 2.0 hdi timing belt info?
thank you both for the quick reply
bick
bick