Timing Belt Kit

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
User avatar
Gregg1100
Posts: 601
Joined: 01 Jul 2001, 23:37
Location: Cwmbran S. Wales
My Cars:
x 5

Timing Belt Kit

Post by Gregg1100 »

Hi,
I have just bought a FAI kit from our local motor factor. I don't know if others here have used them- the rollers look beefier than the original, brackets look a bit different, so will have to look closer when the original is removed. Has anyone else on the forum used FAI stuff before. Xantia 2 Sx 1.9TD

90 Kawa EN 500 A1- was running---now dead again
04 Kawa GPZ 500 E10 -alive and well.
54 Fiat Punto 1.2 Dynamic

Old Xantias- 16v 2litre 1997 VSX, 2 x 1993 TD Lx, S2 SX 1.9TD
Old Bx's--3 x 1.9 D, 1x 1.6 Auto, 1 x 1.9 GTi, 1 x 1.9 TZS
User avatar
CitroJim
A very naughty boy
Posts: 49531
Joined: 30 Apr 2005, 23:33
Location: Paggers
My Cars: Bluebell the AX, Polly the C3 Picasso, Pix the Nissan Pixo, Propel the duathlon bike, TCR Pro the road bike and Fuji the TT bike...
x 6160
Contact:

Re: Timing Belt Kit

Post by CitroJim »

Yes, and they seem fine Greg. AS you say, they look well made and robust.
Jim

Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
citroenxm
Posts: 8061
Joined: 30 Dec 2004, 23:10
Location: Somewhere in North Wales, Anglesey
My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto

2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising
x 70

Re: Timing Belt Kit

Post by citroenxm »

xud engines are sooooo robust ive not actually ever changed and rollers on them as they are already all metal rollers.. My sx td 1994 xantia has 240k on it and well used rollers.. There is however no play in the bearings..

I have though used FAI kits on later hdi engines as they do have rubbish stupid plastic rollers and they are a lot stronger...

Good luck changing the xud tensioner one.. That spring is dammm strong! And its dam fiddle to get back in place..

Paul
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project

A very sad...
1994 XM 2.1 d auto
Post Reply