S2 HDi Bottom Suspension Arm Bush

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
citroenxm
Posts: 8061
Joined: 30 Dec 2004, 23:10
Location: Somewhere in North Wales, Anglesey
My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto

2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising
x 70

S2 HDi Bottom Suspension Arm Bush

Post by citroenxm »

Hi All,

Does any one know if the bottom arm P Bush is available on its own to fit an arm??? Flea bay only seem to list the arm complete for £100 Plus EACH SIDE! :shock:

I need to do both on a car thats come in part exchange...

The Next Q is, are they heated on, or do they just push on??

Thanks
Paul
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project

A very sad...
1994 XM 2.1 d auto
citronut
Posts: 10937
Joined: 29 Apr 2005, 00:46
Location: United Kingdom east sussex
My Cars:
x 92

Re: S2 HDi Bottom Suspension Arm Bush

Post by citronut »

Paul
i have looked at several MK1 and 2 Xants on service citroen
and the only one out of the modles i checked that shows the P bush on its own are the 90 and 110 HDI's, also it doesnt show any HDI's under MK1at all, but only MK2's,

and they both use the same bush but are handed
part No.'s
left 3523.81
right 3523.82

you should be able to have these No.'s crossed over to pattern No.'s,

hope this helps

also they are an interfearance fit so require driftting on in the same way all the other P bush's do,

regards malcolm
Post Reply