What worked for me was to find an empty carpark and slacken the remaining bolts off a couple of turns then drive around the carpark and get some heat into the hub by using the brake it will take a while but you will feel the wheel coming lose.
just be carefull
Locking Bolt Removal....
Moderator: RichardW
Re: Locking Bolt Removal....
2004 C3 XTR HDI 16V 92bhp
2004 Xsara Picasso Exclusive HDI 16V 110bhp
1989 Peugeot J5 Hymer B694 2.5td intercooled 8v 96bhp
2004 Xsara Picasso Exclusive HDI 16V 110bhp
1989 Peugeot J5 Hymer B694 2.5td intercooled 8v 96bhp
- SaabC5
- Posts: 765
- Joined: 01 Aug 2011, 23:18
- Location: SW London
- My Cars: 09 C5 X7 2.0Hdi Exclusive
- x 1
Re: Locking Bolt Removal....
See my friend use this tool yesterday to remove locking nuts off an Audi A6, did all four wheels in approx 15 mins flat! Problem is you can't buy the tool unless you are an approved garage using a company credit/debit card, its not available to the general public for obvious reasons.SaabC5 wrote:A lot of garages carry a special tool to remove locking wheel nuts these days. Its a hardened steel socket with a softer compound metal inside, its hammered onto the nut creating a once only "key" to remove the nut. Its usually about £40 to remove.
A link to the actual tool.. http://www.dynomec.co.uk/indexEnglish.html
09 C5 X7 2.0Hdi Exclusive in Perla Nera black (the best colour)
- CitroJim
- A very naughty boy
- Posts: 49518
- Joined: 30 Apr 2005, 23:33
- Location: Paggers
- My Cars: Bluebell the AX, Polly the C3 Picasso, Pix the Nissan Pixo, Propel the duathlon bike, TCR Pro the road bike and Fuji the TT bike...
- x 6156
- Contact:
Re: Locking Bolt Removal....
If the locker is the pin type Paul, you should see there is a small raised circular bit in the middle. This is enough for a reverse flute socket to get hold of it and unscrew it.
I've done these types in the past with success - ask Toby HDI... He came to see me for 'P bushes one day and forgot his locking key....
I've done these types in the past with success - ask Toby HDI... He came to see me for 'P bushes one day and forgot his locking key....
Jim
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- Location: Somewhere in North Wales, Anglesey
- My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto
2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising - x 70
Re: Locking Bolt Removal....
Your spot on Jim, there is a small bit in the middle..
Can you point me to one for sale, I cant seem to find any..
Paul
Can you point me to one for sale, I cant seem to find any..
Paul
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
-
- Sara Watson's Stalker
- Posts: 7098
- Joined: 19 Aug 2008, 12:38
- Location: NEW South Wales, Australia. I'll show you "Far, far away" ;-)
- My Cars: Peugeot 605
Citroën Berlingo
Alfa 147 - x 93
Paul - this wrapped up yesterday:
http://www.ebay.co.uk/itm/250915506637" onclick="window.open(this.href);return false;
It's interesting how nobody much talks about how it works. Basically the renewable section fits inside a sleeve; the whole jobbie is smacked with an impact driver which forces a couple of prongs/blades into the periphery of the wheel nut whilst simultaneously twisting it all. The prongs are captured by the sleeve, so tightness is assured.
http://www.ebay.co.uk/itm/250915506637" onclick="window.open(this.href);return false;
It's interesting how nobody much talks about how it works. Basically the renewable section fits inside a sleeve; the whole jobbie is smacked with an impact driver which forces a couple of prongs/blades into the periphery of the wheel nut whilst simultaneously twisting it all. The prongs are captured by the sleeve, so tightness is assured.
- The Birdman
- Posts: 182
- Joined: 13 Mar 2011, 09:24
- Location: Antrim,Northern Ireland.
- My Cars:
Re: Locking Bolt Removal....
You could always just get the wheel locking code and order a new locking nut from the Dealer and remove it.
For what we are about to receive may we be truly thank full.
http://www.citroencodes.com" onclick="window.open(this.href);return false;
http://www.peugeotcodes.com" onclick="window.open(this.href);return false;
http://www.citroencodes.com" onclick="window.open(this.href);return false;
http://www.peugeotcodes.com" onclick="window.open(this.href);return false;
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- Location: Somewhere in North Wales, Anglesey
- My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto
2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising - x 70
Re: Locking Bolt Removal....
Thats the obvious which the owner did first.. But surprisingly the dealer was NOT interested!The Birdman wrote:You could always just get the wheel locking code and order a new locking nut from the Dealer and remove it.
Paul
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
Re:
There's another just appeared, on buy it now, £80addo wrote:Paul - this wrapped up yesterday:
http://www.ebay.co.uk/itm/250915506637" onclick="window.open(this.href);return false;
It's interesting how nobody much talks about how it works. Basically the renewable section fits inside a sleeve; the whole jobbie is smacked with an impact driver which forces a couple of prongs/blades into the periphery of the wheel nut whilst simultaneously twisting it all. The prongs are captured by the sleeve, so tightness is assured.
might not stay there long
Last edited by andy5 on 27 May 2012, 03:27, edited 1 time in total.