Depressurise ?

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
User avatar
froggy
Donor 2023
Posts: 640
Joined: 05 Jul 2010, 20:24
Location: too far from citrojim"s
My Cars: S2 Xantia Forte 185435.
Peugeot 306 Meridian, the boss.
x 2

Depressurise ?

Post by froggy »

Hi, Iam just about to change an O ring in the Hydraulic pump on my S1 Xantia . Do I need to put suspension on high and depressurise ? cheers Terry .
Terry
Xantia TD lx series1 SORN
Peugeot 306 meridian [ the boss]
Xantia HDI Forte 1997 CC
citronut
Posts: 10937
Joined: 29 Apr 2005, 00:46
Location: United Kingdom east sussex
My Cars:
x 92

Post by citronut »

you could with the engine running open the bleed valve (12mm spanner sieze bolt head) on the regulator no more than 3/4 of a turn,

then turn the engine off once the hydraulic warning stop light lights,


regards malcolm
User avatar
Xaccers
Posts: 7654
Joined: 07 Feb 2007, 23:46
Location: Milling around Milton Keynes
My Cars:
x 184

Re: Depressurise ?

Post by Xaccers »

froggy wrote:Hi, Iam just about to change an O ring in the Hydraulic pump on my S1 Xantia . Do I need to put suspension on high and depressurise ? cheers Terry .
To depressurise you do it with the car on LOW :)
1.9TD+ SX Xantia Estate (Cassy) running on 100% veg
1.9TD SX Xantia Hatchback (Jenny) running on 100% veg for sale
Laguna II 2.0dCi Privilege (Monty)

DIY sphere tool
Post Reply