Hi All,
Yes it's me again - this time with a question about C5 rear calipers. Mr Haynes says that a new fluid pipe seal is required when reconnecting the fluid pipe to the caliper and then tighten the union. Seal ? What seal ? I know there are pipe seals on the LHM unions but surely not on DOT4 brake systems? I found the usual flared pipe and union on the rigid brake pipe but no seal or have I missed something here? Thanks in advance for any advice,
Regards,
John.
C5 '52 ESTATE REAR BRAKES
Moderator: RichardW
C5 '52 ESTATE REAR BRAKES
My chariots : 2002 Pug 406 110 HDI Executive Estate 138K
1995 Citroen AX 1.0 Debut 26K
I Blame it all on my Dad!! (Sadly had to give up driving & his 2nd BX) but Mum still has a C1.
1995 Citroen AX 1.0 Debut 26K
I Blame it all on my Dad!! (Sadly had to give up driving & his 2nd BX) but Mum still has a C1.
Thanks AndersDK - you have hit my suspicions on the head !! I have just noticed that the Haynes C5 manual 2001 to Mar 2008 does not cover the V6 or 2.2 diesel - shan't be buying either of those then. All the best, John.
My chariots : 2002 Pug 406 110 HDI Executive Estate 138K
1995 Citroen AX 1.0 Debut 26K
I Blame it all on my Dad!! (Sadly had to give up driving & his 2nd BX) but Mum still has a C1.
1995 Citroen AX 1.0 Debut 26K
I Blame it all on my Dad!! (Sadly had to give up driving & his 2nd BX) but Mum still has a C1.